Repariere deine Sachen Community Store

HP ENVY 5530 Front Panel Replacement

Einleitung

The panel is what holds the screen in place. Before removing the panel make sure the printer is unplugged.

Was du brauchst

  1. HP ENVY 5530 Front Panel Replacement, Front Panel: Schritt 1, Bild 1 von 1

    • Lift up printer screen.

    Übersetzen

  3. HP ENVY 5530 Front Panel Replacement: Schritt 2, Bild 1 von 3 HP ENVY 5530 Front Panel Replacement: Schritt 2, Bild 2 von 3 HP ENVY 5530 Front Panel Replacement: Schritt 2, Bild 3 von 3

    • Use the Metal Spudger from the IFIXIT Toolkit to pry the left corner of the front panel.

    • Slowly pry the front panel by sliding the Metal Spudger along the border of the front panel.

    Übersetzen

    On some printer version, you may find a single torx 10 screw under the right sticker.

    Remove it and then slide the panel to the right then to the top.

    Easy as said!

    No need to use any spudger.

    Learned it the hard way ;)

    Cecil His Mahier - Antwort

  4. HP ENVY 5530 Front Panel Replacement: Schritt 3, Bild 1 von 2 HP ENVY 5530 Front Panel Replacement: Schritt 3, Bild 2 von 2

    • Remove the front panel by lifting each corner up.

    • Replace the front panel.

    Übersetzen

    There’s a screw undcer the model label on the right. Peel the label up right to left to expose the screw, remove the screw to lift the front panel off.

    sel full - Antwort

Abschluss

To reassemble your device, follow these instructions in reverse order.

Autor:in

mit 3 anderen Mitwirkenden

Elizabeth Surface

Mitglied seit: 08/26/15

1.465 Reputation

9 Anleitungen geschrieben

Auszeichnungen: 16

+ 13 weitere Auszeichnungen

Team

USF Tampa, Team 4-6, Meier Fall 2015 Mitglied von USF Tampa, Team 4-6, Meier Fall 2015

USFT-MEIER-F15S4G6

4 Mitglieder

18 Anleitungen geschrieben

4 Kommentare

My HP Envy 5530 had a screw hidden beneath the label on the right side of the front panel. I used a knife to lift the label to access the screw.

rndymike - Antwort

Is the front panel from a 5532 compatible with the Envy 5530?

Armando Pagan - Antwort

Wish I would have seen the comment about the screw… fix your post… at least protect others from making the same mistake

Azpatch - Antwort

Where does the cable go?

Victorian Lover - Antwort

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 6

Letzte 30 Tage: 31

Insgesamt: 1,976