Einleitung

The screen is one of the most commonly damaged components of the HP Elite x2 1012 G2. Additionally, this guide is an important prerequisite to all other repairs on this device. Thankfully, removal and repair of the screen is relatively easy.

  1. Make sure the device is turned off before starting.
    • Make sure the device is turned off before starting.

    • Orient the device so the back is facing you, with the kickstand up.

    Kommentar hinzufügen

  2. Remove the six 3mm Torx T5 screws underneath the kickstand.
    • Remove the six 3mm Torx T5 screws underneath the kickstand.

    Kommentar hinzufügen

    • Turn the device over so the screen is facing you.

    • Place a suction cup firmly onto a corner of the screen.

    • Lift up gently until you see the screen separate from the casing.

    • Repeat this process for all four corners.

    Kommentar hinzufügen

    • Lift the screen up and off of the device.

    • Pry each corner up first, otherwise you may damage or crack the screen.

    Kommentar hinzufügen

    • Remove the two connectors on the back of the screen by lifting the connector tabs on the motherboard with a plastic opening tool and pulling gently.

    Kommentar hinzufügen

    • Remove the screen by gently lifting it off of the device.

    Kommentar hinzufügen

Abschluss

To reassemble your device, follow these instructions in reverse order.

Ein weiterer Nutzer hat diese Anleitung absolviert.

Noah Stapp

Mitglied seit 18.04.2018

425 Reputation

2 Anleitungen geschrieben

Team

Cal Poly, Team S18-G5, Livingston Spring 2018 Mitglied von Cal Poly, Team S18-G5, Livingston Spring 2018

CPSU-LIVINGSTON-S18S18G5

4 Mitglieder

10 Anleitungen geschrieben

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 5

Letzte 7 Tage: 21

Letzte 30 Tage: 80

Insgesamt: 415