Einleitung
Whether you want to replace your faulty DVD drive or upgrade to a Blue-Ray one, this guide is for you.
Was du brauchst
-
-
Slide the release latch away from the nearest edge.
-
Slide the back cover off of the computer.
-
-
-
Remove the six 3.7mm Phillips screws.
-
Slide the back cover until it clicks, then lift it straight off.
-
-
-
-
Remove the four 3.7mm Phillips screws that secure the optical drive to the computer.
-
Slowly lift the optical drive away from the computer ensuring that you don't put stress on the connecting cable.
-
-
-
Remove Sub Speaker assembly first in order to remove Optical drive. Carefully disconnect speaker connector.
-
-
-
Carefully disconnect the connecting cable by lifting the white clamp with a Flathead screwdriver and pulling on the blue tab away from connector.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Team
Cal Poly, Team 14-8, Amido Spring 2015 Mitglied von Cal Poly, Team 14-8, Amido Spring 2015
CPSU-AMIDO-S15S14G8
4 Mitglieder
12 Anleitungen geschrieben
