Zum Hauptinhalt wechseln

Diese Version enthält möglicherweise inkorrekte Änderungen. Wechsle zur letzten geprüften Version.

Was du brauchst

  1. Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!

    : Schritt 1, Bild 1 von 1
    • Use your hands to unclip the plastic snaps on the back panel of the device.

  2. Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!

    : Schritt 2, Bild 1 von 1
    • Remove the three 11.5mm PH2 screws from the back panel.

    • The screws will not fall out of the back panel, but they will unscrew to release the back panel.

  3. Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!

    : Schritt 3, Bild 1 von 1
    • Now, take the back panel off by pulling at it gently with your hands.

  4. Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!

    : Schritt 4, Bild 1 von 2 : Schritt 4, Bild 2 von 2
    • Use your hands to unclip the plastic bezels for the DVD drive and ports.

    • To unclip the plastic bezels, push the middle of each plastic bezel towards the center of the computer, and then pull them outwards.

    • You may want to lay the computer face down, on a flat, clean surface to ensure nothing falls out when disassembling the computer for next steps.

    One screw to remove the DVD drive is easier and safer than removing the bezel.

    Art Venable - Antwort

    Hi where can i find the Display?

    Erkan Tekin - Antwort

  5. Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!

    : Schritt 5, Bild 1 von 1
    • Remove the nineteen 10mm T15 black screws from the edge of the computer.

    • Lay the computer on its front when preforming this step, and leave it face down for the rest of the guide.

    Had to remove the base assembly to get at one of the screws holding the display on.

    Had to disconnect speaker wires.

    Also had to disconnect a number of small connections at the top of the device - webcam, microphone, etc.

    Art Venable - Antwort

  6. Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!

    : Schritt 6, Bild 1 von 1
    • Lift up the computer by the base very slowly, and disconnect the three wired connections to the display with your hands. Always disconnect wired connections from the plastic base.

  7. Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!

    : Schritt 7, Bild 1 von 1
    • Set the computer aside, and use a small knife to cut the strips attaching the display to the digitizer.

  8. Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!

    : Schritt 8, Bild 1 von 1
    • Use a plastic spudger to unclip the 3 ribbon clips on the back of the display.

  9. Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!

    : Schritt 9, Bild 1 von 1
    • Remove the four 7mm T15 silver screws from the edge of the computer.

  10. Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!

    : Schritt 10, Bild 1 von 1
    • Gently pull the display free from the digitizer with your hands.

  11. Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!

    : Schritt 11, Bild 1 von 2 : Schritt 11, Bild 2 von 2
    • Remove the four 17.5mm T15 screws from the speakers.

    • When the speakers are free, use your hands to pull them free from the digitizer.

  12. Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!

    : Schritt 12, Bild 1 von 1
    • Remove the three 10mm T15 screws from bezel.

  13. Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!

    : Schritt 13, Bild 1 von 1
    • Use your hands to pull the plastic bezel off of the digitizer.

    If digitizer glass is shattered can this be reassembled without glass or touch screen function?

    Steve Cacace - Antwort

Ziellinie

7 weitere Nutzer:innen haben diese Anleitung absolviert.

Zachary Dicks

Mitglied seit: 10/01/15

1.117 Reputation

7 Anleitungen geschrieben

Team

Cal Poly, Team 5-10, Maness Fall 2015 Mitglied von Cal Poly, Team 5-10, Maness Fall 2015

CPSU-MANESS-F15S5G10

4 Mitglieder

14 Anleitungen geschrieben

16 Kommentare

On step 5 you've to remove also the 4 silver screw that keep display to the mainboard chassis.

illola - Antwort

From where can I buy the glass to replace?

Aram Vardanyan - Antwort

i wont 5 pics please send yor number watsap or send me Offer price for HP ENVY 23-d117a glass

Thanks >>

Feras emad

00966543470171

info@fersawy.com

Feras Emad - Antwort

687535-001 this is the part required

Model No HP envy 23 Delhi 0201 N.

Serial no. CZC 31443 LD kindly let me know whether it is available and please mail the details to sunitha.jijo@yahoo.com

Sunitha.jijo@yahoo.com - Antwort

Hi.

My touchscreen has been cracked too.

Can anyone help to direct me to somewhere to buy a replacement screen please?

frank_scullion@yahoo.co.uk

Thanks in anticipation

Frank Scullion - Antwort

I need replacement digitizer. pls contact if you have any thx. mavioglu@hotmail.com

oguz - Antwort

Hi,

My touchscreen has been broken and i need a new one for replacement or if some technical support do it.

hp envy recline 23-k220ne

My email is:

alberto@surweb.es

thanks ;)

Alberto - Antwort

Hi, I also need a new screen for my hp envy 23 , links would be greatly appreciated

glg2401@gmail.com

George - Antwort

i need a 23 inch hp touchsmart screen very badly anyone???

jayfinks - Antwort

Hi, I am in need of the replacement glass for my HP ENVY 23 touchscreen also. It fell and cracked while in transportation. The computer is still operational but my glass screen is cracked in a about 8 places. Where can I find the glass cover for this touchscreen at a reasonable price? Reach me at : ( markmccord71801@att.net ). Thanks for the assistance.

Mark McCord - December 5th, 2018

markmccord71801 - Antwort

Depends on what you think is reasonable. There are several on eBay, but there are variations in the ribbon cable configurations within the same series, which means you probably will have to disassemble to see which one you need.

Amy Stinson -

Im also looking for a screen for my HP Envy Touchsmart 23se-d494 anyone know where to buy one??

Derek Vasquez - Antwort

glass replacement the computer still works?

Derek Vasquez - Antwort

Need to replace a glass for HP Envy 23-d160qd.

Availability ? Cost ?

Scott 'Dragon' Runde - Antwort

Hola , do you know number part ?

Araceli Sánchez Bautista - Antwort

Hi.

My touchscreen has been cracked too.

Can anyone help to direct me to somewhere to buy a replacement screen please? agencethaly@gmail.com

Nathalie Legault - Antwort

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 2

Letzte 7 Tage: 18

Letzte 30 Tage: 56

Insgesamt: 13,917