Einleitung

This guide is to help you replace your fan on the HP Envy Sleekbook m6-k010dx.

Ersatzteile

Kein Ersatzteil erforderlich.

  1. Remove the four 9mm Phillips #00 screws.
    • Remove the four 9mm Phillips #00 screws.

    • Remove the eight 9mm Phillips #00 screws.

  2. Use the plastic opening tool and your hands to remove the bottom cover. Use the plastic opening tool and your hands to remove the bottom cover.
    • Use the plastic opening tool and your hands to remove the bottom cover.

  3. Disconnect the battery power cable from the motherboard. Remove the six 6mm Phillips #00 screws from the battery.
    • Disconnect the battery power cable from the motherboard.

    • Remove the six 6mm Phillips #00 screws from the battery.

  4. Kostenloser Versand für alle Bestellungen über 100 $ oder mit einem Pro Tech Toolkit!

    Schau dich im Store um
  5. Lift the battery out of the laptop. Lift the battery out of the laptop.
    • Lift the battery out of the laptop.

  6. Remove two 3mm Phillips #00 screws from the fan.
    • Remove two 3mm Phillips #00 screws from the fan.

  7. Disconnect the fan cable by pulling it out of the motherboard socket. Disconnect the fan cable by pulling it out of the motherboard socket.
    • Disconnect the fan cable by pulling it out of the motherboard socket.

  8. Lift the fan upwards to remove it from the computer.
    • Lift the fan upwards to remove it from the computer.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Ana Novo

Mitglied seit: 14.02.2018

305 Reputation

2 Anleitungen geschrieben

Team

USF Tampa, Team S1-G4, Nance Spring 2018 Mitglied von USF Tampa, Team S1-G4, Nance Spring 2018

USFT-NANCE-S18S1G4

4 Mitglieder

5 Anleitungen geschrieben

Statistik anzeigen:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 4

Insgesamt: 131