Repariere deine Sachen Community Store

HP Envy x360 m6-aq103dx Hard drive Replacement

Einleitung

Is the hard drive on you HP Envy x360 m6-aq103dx acting up or not working correctly? Follow this simple guide to replace the hard drive. You'll need a plastic opening tool and a Phillips Head #1 screwdriver.

Was du brauchst

  1. HP Envy x360 m6-aq103dx Hard drive Replacement, Bottom Cover: Schritt 1, Bild 1 von 3 HP Envy x360 m6-aq103dx Hard drive Replacement, Bottom Cover: Schritt 1, Bild 2 von 3 HP Envy x360 m6-aq103dx Hard drive Replacement, Bottom Cover: Schritt 1, Bild 3 von 3

    • Flip the laptop over to expose the underside.

    • Remove the two grip pads with blue plastic opening tool by inserting the tool between the laptop and the pads and slowly lifting up.

    • The grip pads are tacky, remove slowly to avoid separating the adhesive.

    Bearbeiten

  2. HP Envy x360 m6-aq103dx Hard drive Replacement: Schritt 2, Bild 1 von 1

    • Remove the two 8 mm Phillips Head screws that were under the grip pads using a Phillip's Head 1 Screwdriver.

    Bearbeiten

  4. HP Envy x360 m6-aq103dx Hard drive Replacement: Schritt 3, Bild 1 von 1

    • Remove the six 5 mm Torx screws using a T5 Torx Screwdriver.

    Bearbeiten

  5. HP Envy x360 m6-aq103dx Hard drive Replacement: Schritt 4, Bild 1 von 3 HP Envy x360 m6-aq103dx Hard drive Replacement: Schritt 4, Bild 2 von 3 HP Envy x360 m6-aq103dx Hard drive Replacement: Schritt 4, Bild 3 von 3

    • Use the nylon spudger to pop off the bottom cover by inserting it into the heat vent and twisting to the left or right.

    • You may hear a slight clicking or popping, but that is normal.

    Bearbeiten

    The case is secured by plastic hooks at 1” intervals. Use the nylon spudger and the opening tool to lever around the rim of the case. Start at the edge of the heat vent and work around the rim. Each plastic fastener will make a popping noise as they release.

    David Shorr - Antwort

  6. HP Envy x360 m6-aq103dx Hard drive Replacement, Hard Drive: Schritt 5, Bild 1 von 3 HP Envy x360 m6-aq103dx Hard drive Replacement, Hard Drive: Schritt 5, Bild 2 von 3 HP Envy x360 m6-aq103dx Hard drive Replacement, Hard Drive: Schritt 5, Bild 3 von 3

    • Disconnect the ribbon cable with the purple tag by flipping the black tab with the plastic opening tool.

    • Disconnect the ribbon cable by gently pulling it away from the connector with your fingers.

    Bearbeiten

  7. HP Envy x360 m6-aq103dx Hard drive Replacement: Schritt 6, Bild 1 von 3 HP Envy x360 m6-aq103dx Hard drive Replacement: Schritt 6, Bild 2 von 3 HP Envy x360 m6-aq103dx Hard drive Replacement: Schritt 6, Bild 3 von 3

    • Remove the two Phillips head screws (5 mm) using the Phillip's head #1 screwdriver.

    • Use your hands to lift the hard drive up and remove it.

    Bearbeiten
Abschluss

To reassemble your device, follow these instructions in reverse order.

5 weitere Nutzer:innen haben diese Anleitung absolviert.

Autor:in

mit 3 anderen Mitwirkenden

Jordan Eremeyeff

Mitglied seit: 10/01/17

597 Reputation

3 Anleitungen geschrieben

Auszeichnungen: 9

+ 6 weitere Auszeichnungen

Team

Cal Poly, Team S4-G3, Livingston Fall 2017 Mitglied von Cal Poly, Team S4-G3, Livingston Fall 2017

CPSU-LIVINGSTON-F17S4G3

4 Mitglieder

9 Anleitungen geschrieben

Ein Kommentar

Great guide. Only thing i did different was not removing the ribbon cable. It’s not necessary. Just unscrew the hard drive enclosure and you’ll have plenty of room to disconnect the sata connector plugged in to the drive.

Ron H - Antwort

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 4

Letzte 7 Tage: 12

Letzte 30 Tage: 31

Insgesamt: 7,107