Zum Hauptinhalt wechseln

Repariere deine Sachen

Recht auf Reparatur

Store

Einleitung

Replace the formatter in an HP LaserJet 1160 or 1320.

  1. Pull on the two tabs on the back of the printer to release the left side cover. Remove the cover by rotating it towards the front of the printer. Remove the cover by rotating it towards the front of the printer.
    • Pull on the two tabs on the back of the printer to release the left side cover.

    • Remove the cover by rotating it towards the front of the printer.

  2. Das Essential Toolkit

    Die nützlichsten Werkzeuge in unserem kompaktesten Kit.

    Jetzt kaufen

    Das Essential Toolkit

    Die nützlichsten Werkzeuge in unserem kompaktesten Kit.

    Jetzt kaufen
  3. Remove 2 screws on the I/O port cover. Remove 6 screws on the formatter. Disconnect 3 connectors from the formatter.
    • Remove 2 screws on the I/O port cover.

    • Remove 6 screws on the formatter.

    • Disconnect 3 connectors from the formatter.

    • Disconnect 2 flat flexible cables from the formatter.

    • Remove the formatter from the printer.

    • Be careful not to fold, crease, or tear flat flexible cables.

    • The I/O port cover will need to be transferred to the new formatter before installing it.

Abschluss

To reassemble your device, follow these instructions in reverse order.

2 weitere Nutzer haben diese Anleitung absolviert.

jdp23

Mitglied seit: 22.08.2013

1.275 Reputation

23 Anleitungen geschrieben

Additional connector attached to bottom left of board ignored

R F Rossiter - Antwort

Kommentar hinzufügen

Statistik anzeigen:

Letzten 24 Stunden: 0

Letzten 7 Tage: 0

Letzten 30 Tage: 8

Insgesamt: 914