Zum Hauptinhalt wechseln

HP Mini 210-2070NR Wi-Fi Card (WLAN Module) Replacement

Was du brauchst

  1. HP Mini 210-2070NR Wi-Fi Card (WLAN Module) Replacement, Battery and Service Access Cover: Schritt 1, Bild 1 von 1
    • Before beginning, make sure that your computer is turned off and all external power cords are disconnected.

    • Close the laptop and turn it over so that the underside is up and the silver battery bay is facing towards you.

  2. HP Mini 210-2070NR Wi-Fi Card (WLAN Module) Replacement: Schritt 2, Bild 1 von 3 HP Mini 210-2070NR Wi-Fi Card (WLAN Module) Replacement: Schritt 2, Bild 2 von 3 HP Mini 210-2070NR Wi-Fi Card (WLAN Module) Replacement: Schritt 2, Bild 3 von 3
    • The battery locking latch is on the bottom right corner; slide it inward to unlock the battery.

    • Slide the battery release latch inwards.

    • Pull the battery towards you to remove it.

  3. HP Mini 210-2070NR Wi-Fi Card (WLAN Module) Replacement: Schritt 3, Bild 1 von 3 HP Mini 210-2070NR Wi-Fi Card (WLAN Module) Replacement: Schritt 3, Bild 2 von 3 HP Mini 210-2070NR Wi-Fi Card (WLAN Module) Replacement: Schritt 3, Bild 3 von 3
    • Slide the service access cover release lever to the right.

    • While holding the lever to the right, lift up the laptop's bottom cover gently and remove the cover.

  4. HP Mini 210-2070NR Wi-Fi Card (WLAN Module) Replacement: Schritt 4, Bild 1 von 1
    • Orient the computer as shown in the picture.

  5. HP Mini 210-2070NR Wi-Fi Card (WLAN Module) Replacement, Wi-Fi Card (WLAN Module): Schritt 5, Bild 1 von 2 HP Mini 210-2070NR Wi-Fi Card (WLAN Module) Replacement, Wi-Fi Card (WLAN Module): Schritt 5, Bild 2 von 2
    • Locate the Wi-Fi Card (WLAN Module), near the computer's bottom left corner.

  6. HP Mini 210-2070NR Wi-Fi Card (WLAN Module) Replacement: Schritt 6, Bild 1 von 3 HP Mini 210-2070NR Wi-Fi Card (WLAN Module) Replacement: Schritt 6, Bild 2 von 3 HP Mini 210-2070NR Wi-Fi Card (WLAN Module) Replacement: Schritt 6, Bild 3 von 3
    • Disconnect the two cables from the Wi-Fi card by gently lifting them away from the card.

    • There should be two black cables, one labeled with a white sticker, connected to the module.

  7. HP Mini 210-2070NR Wi-Fi Card (WLAN Module) Replacement: Schritt 7, Bild 1 von 1
    • Remove the two 2.0 x 3.0 screws securing the Wi-Fi card using a Phillips #00 screwdriver

    • The card should tilt up away from the laptop at an angle after removing the screws.

  8. HP Mini 210-2070NR Wi-Fi Card (WLAN Module) Replacement: Schritt 8, Bild 1 von 1
    • Remove the Wi-Fi card by gently pulling it out of its slot at an angle.

    • Potential for device damage: Be sure to pull gently and at an angle away from you. If the card is pulled straight up, there is a chance it could break or bend.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Taylor

Mitglied seit: 10/05/12

116 Reputation

1 Anleitung geschrieben

Team

Cal Poly, Team 3-23, Amido Fall 2012 Mitglied von Cal Poly, Team 3-23, Amido Fall 2012

CPSU-AMIDO-F12S3G23

4 Mitglieder

6 Anleitungen geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 1

Insgesamt: 1,180