Einleitung

If your HP Mini 311 has ran out of memory or you desire to have more memory, change the hard drive on your device.

Ersatzteile

Kein Ersatzteil erforderlich.

  1. Lay the laptop  on a flat surface, bottom side up and slide the two battery release latches toward the outside of the case.
    • Lay the laptop on a flat surface, bottom side up and slide the two battery release latches toward the outside of the case.

    Kommentar hinzufügen

  2. Slide the battery away from the device to remove.
    • Slide the battery away from the device to remove.

    Kommentar hinzufügen

    • With the device still in a bottom side up position, proceed to unscrew the two 4.8mm Phillips 00 screws from the memory shield.

    • The screws will remain in the shied.

    Kommentar hinzufügen

    • Lift the memory shield up and remove from the laptop.

    Kommentar hinzufügen

    • Grab the left black, plastic tab and carefully pull upward.

    • Be sure to pull carefully. Pulling too forcefully may damage the tab.

    Kommentar hinzufügen

    • Grab a hold of the wire connecting the hard drive and the device.

    • Pull upward, perpendicular to the surface of the laptop, releasing the connector tethering the hard drive to the motherboard.

    Kommentar hinzufügen

Abschluss

To reassemble your device, follow these instructions in reverse order.

2 weitere Nutzer haben diese Anleitung absolviert.

Christian Santoyo

Mitglied seit 31.01.2013

369 Reputation

6 Anleitungen geschrieben

Team

Cal Poly, Team 20-4, Maness Winter 2013 Mitglied von Cal Poly, Team 20-4, Maness Winter 2013

CPSU-MANESS-W13S20G4

4 Mitglieder

6 Anleitungen geschrieben

What size hard drive does this unit take?

Travis Duncan - Antwort

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 0

Letzte 7 Tage: 4

Letzte 30 Tage: 30

Insgesamt: 3,042