Einleitung
If your HP Mini 311 has ran out of memory or you desire to have more memory, change the hard drive on your device.
Was du brauchst
-
-
Lay the laptop on a flat surface, bottom side up and slide the two battery release latches toward the outside of the case.
-
-
-
-
With the device still in a bottom side up position, proceed to unscrew the two 4.8mm Phillips 00 screws from the memory shield.
-
-
-
Grab a hold of the wire connecting the hard drive and the device.
-
Pull upward, perpendicular to the surface of the laptop, releasing the connector tethering the hard drive to the motherboard.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Rückgängig: Ich habe diese Anleitung nicht absolviert.
4 weitere Nutzer:innen haben diese Anleitung absolviert.