Zum Hauptinhalt wechseln

HP Officejet Pro 6230 Printer Power Adaptor Replacement

Was du brauchst

  1. HP Officejet Pro 6230 Printer Power Adaptor Replacement, Power Adapter: Schritt 1, Bild 1 von 2 HP Officejet Pro 6230 Printer Power Adaptor Replacement, Power Adapter: Schritt 1, Bild 2 von 2
    • Turn the printer around and locate the back panel for power.

    • Note: If you are unsure where the panel is located, look in the back right corner. The panel has “100-240V~50/60 Hz 700 mA” inscribed on it.

  2. HP Officejet Pro 6230 Printer Power Adaptor Replacement: Schritt 2, Bild 1 von 1
    • Unscrew the 0.8 mm screw holding in the panel using a T6 Torx screwdriver.

    • Note: Rotate the screw counterclockwise to loosen. Keep it in a safe place.

  3. HP Officejet Pro 6230 Printer Power Adaptor Replacement: Schritt 3, Bild 1 von 1
    • Remove the HP AC Power Adapter from the slot.

  4. HP Officejet Pro 6230 Printer Power Adaptor Replacement: Schritt 4, Bild 1 von 1
    • Locate the blue/green/red wire attached to the back of the adapter.

  5. HP Officejet Pro 6230 Printer Power Adaptor Replacement: Schritt 5, Bild 1 von 1
    • Unplug the current adapter from the wire.

    • Grasp the end of the connector, not the wires, to pull it out.

  6. HP Officejet Pro 6230 Printer Power Adaptor Replacement: Schritt 6, Bild 1 von 1
    • Affix the new adapter to the same wire.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Natalie Carmona

Mitglied seit: 01/28/17

101 Reputation

1 Anleitung geschrieben

Team

USF Sarasota-Manatee, Team 1-1, Stewart Spring 2017 Mitglied von USF Sarasota-Manatee, Team 1-1, Stewart Spring 2017

USFSM-STEWART-S17S1G1

19 Mitglieder

19 Anleitungen geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 1

Letzte 30 Tage: 7

Insgesamt: 1,064