Einleitung

The Power Source Adapter on the HP Officejet Pro 8600 plus may have connection issues after wear and repeated use. This guide describes how to replace the Power Source Adapter.

Ersatzteile

Kein Ersatzteil erforderlich.

Turn the printer so the back is facing you.
  • Turn the printer so the back is facing you.

  • Put the printer in a vertical position by lifting its right side.

Kommentar hinzufügen

Remove the two 12mm-T10 Torx screws on the top edge of the printer.
  • Remove the two 12mm-T10 Torx screws on the top edge of the printer.

Kommentar hinzufügen

  • Rotate the printer clockwise so the bottom of the printer is facing you.

Kommentar hinzufügen

  • Insert the plastic opening tool underneath the slot on the right that aligns with the edge of the back panel.

  • Insert a second plastic opening tool in the notch lining up with the crease in the back panel.

  • This step requires applying a significant amount of force on the left notch. Don't be alarmed if you hear popping noises.

Kommentar hinzufügen

  • Remove the side panel from the printer by lifting upwards toward you.

  • For reassembly, slide the side panel from left to right into place.

Kommentar hinzufügen

  • Rotate the printer to its standard position.

Kommentar hinzufügen

  • Unplug the black wire with the white cap connecting the power supply to the motherboard.

Kommentar hinzufügen

  • Remove the two 12mm-T10 Torx screws from the base of the power supply mount.

Kommentar hinzufügen

  • Place your left hand on the left side of the power supply through the opening in the side of the printer.

Kommentar hinzufügen

  • Grab the base of the cable on the right side of the power supply with your right hand.

  • Remove the power supply by pulling your right hand toward you and pushing your left fingers toward you.

Kommentar hinzufügen

Abschluss

To reassemble your device, follow these instructions in reverse order.

Ein weiterer Nutzer hat diese Anleitung absolviert.

Karissa Roof

Mitglied seit 18.04.2018

184 Reputation

1 Anleitung geschrieben

Team

Cal Poly, Team S16-G4, Livingston Spring 2018 Mitglied von Cal Poly, Team S16-G4, Livingston Spring 2018

CPSU-LIVINGSTON-S18S16G4

4 Mitglieder

5 Anleitungen geschrieben

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 4

Letzte 7 Tage: 15

Letzte 30 Tage: 77

Insgesamt: 218