Repariere deine Sachen Community Store

HP Pavilion 15 P Series Motherboard Replacement

Was du brauchst

  1. HP Pavilion 15 P Series Motherboard Replacement, Shutdown Laptop: Schritt 1, Bild 1 von 1

    • Before working on the laptop, make sure it is shut down.

    Übersetzen

  2. HP Pavilion 15 P Series Motherboard Replacement, Remove Battery: Schritt 2, Bild 1 von 3 HP Pavilion 15 P Series Motherboard Replacement, Remove Battery: Schritt 2, Bild 2 von 3 HP Pavilion 15 P Series Motherboard Replacement, Remove Battery: Schritt 2, Bild 3 von 3

    • Pull the locking tab to the right showing a unlocked symbol.

    • Then pull the release tab to the left, releasing the battery.

    • Lift the battery out of its connection.

    Übersetzen

  3. HP Pavilion 15 P Series Motherboard Replacement, Remove Optical Drive: Schritt 3, Bild 1 von 2 HP Pavilion 15 P Series Motherboard Replacement, Remove Optical Drive: Schritt 3, Bild 2 von 2

    • Unscrew the single Phillips #0 screw that holds the optical drive in place.

    • Using a spudger push the optical drive out.

    • Pull the optical drive completely out and set it to the side.

    Übersetzen

  5. HP Pavilion 15 P Series Motherboard Replacement, Remove the Hinge Caps: Schritt 4, Bild 1 von 3 HP Pavilion 15 P Series Motherboard Replacement, Remove the Hinge Caps: Schritt 4, Bild 2 von 3 HP Pavilion 15 P Series Motherboard Replacement, Remove the Hinge Caps: Schritt 4, Bild 3 von 3

    • Using a spudger, pry up the rubber cap.

    • Remove the single screw underneath the cap.

    • Slightly lift up on the marked section of the hinge cap. Pull away from the computer to release the cap.

    • Remove the hinge screw.

    • Repeat all steps on the other side.

    Übersetzen

  6. HP Pavilion 15 P Series Motherboard Replacement, Remove Bottom Screws.: Schritt 5, Bild 1 von 1

    • Remove each of the highlighted screws.

    • Note, this screw is sometimes covered by a cap.

    • Remove the silver pan head crew in the optical drive bay.

    Übersetzen

  7. HP Pavilion 15 P Series Motherboard Replacement, Remove the Top Case: Schritt 6, Bild 1 von 3 HP Pavilion 15 P Series Motherboard Replacement, Remove the Top Case: Schritt 6, Bild 2 von 3 HP Pavilion 15 P Series Motherboard Replacement, Remove the Top Case: Schritt 6, Bild 3 von 3

    • Flip your computer back over and open the display. Using a sputter, opening tool, guitar pick, or card pry up on the top case between the frame and itself.

    • Follow all the way around the top case gently, until the keyboard is able to be lifted freely.

    • NOTE* Do not lift the keyboard off until the next step in which we pull the ribbon cable connections.

    • Using your spudger, or prying tool lift the releases for each ribbon cable. *Be cautious when removing and handling ribbon cables as they are very fragile.

    • Lastly, remove the last two ribbon cables located at the top of the keyboard.

    Übersetzen

  8. HP Pavilion 15 P Series Motherboard Replacement, Removing the Mother Board: Schritt 7, Bild 1 von 3 HP Pavilion 15 P Series Motherboard Replacement, Removing the Mother Board: Schritt 7, Bild 2 von 3 HP Pavilion 15 P Series Motherboard Replacement, Removing the Mother Board: Schritt 7, Bild 3 von 3

    • Remove each cable and connection to the logic board.

    • Next, remove the screws holding the motherboard to the bottom case.

    • There may be a screw in this area, there was not in the computer I worked on.

    • Remove the screw holding the wifi card in place. Pull the wifi card out.

    Übersetzen

  9. HP Pavilion 15 P Series Motherboard Replacement, Finish Removing the Mother Board: Schritt 8, Bild 1 von 1

    • The hardest connection to remove, this is the cable to the AC/DC power port. Remove it by pulling the outside edges of the connector and wiggling gently.

    Übersetzen

  10. HP Pavilion 15 P Series Motherboard Replacement, Transfer the Fan to the New Motherboard: Schritt 9, Bild 1 von 2 HP Pavilion 15 P Series Motherboard Replacement, Transfer the Fan to the New Motherboard: Schritt 9, Bild 2 von 2

    • Remove the fan by disconnecting the white pin connector and then removing the only Phillips crew holding the fan in place.

    • Now you're ready to put the new logic board in!

    Übersetzen
Abschluss

To reassemble your device, follow these instructions in reverse order.

8 weitere Nutzer:innen haben diese Anleitung absolviert.

Autor:in

mit 4 anderen Mitwirkenden

help

Mitglied seit: 07/24/14

431 Reputation

1 Anleitung geschrieben

Auszeichnungen: 13

+ 10 weitere Auszeichnungen

Team

Out of a Jam Solutions Mitglied von Out of a Jam Solutions

Business

2 Mitglieder

3 Anleitungen geschrieben

3 Kommentare

Thanks for this guide. Apparently the RAM is on the underside of the logic board?

I have a HP 15-P189NA which could do with a RAM upgrade.

Douglas Bateman - Antwort

Das Modell 15-P151NG ist etwas anders, hilft trotzdem die Anleitung.

Alex Barblexi - Antwort

Ich wäre an dem defekten Mainboard interessiert.

Bernd Dreyer - Antwort

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 1

Letzte 7 Tage: 21

Letzte 30 Tage: 116

Insgesamt: 15,202