HP Pavilion 15-ab165us Battery and Back Cover Replacement

Einleitung

Most components that need to be replaced are inside the base of the laptop. The computer will need to be disassembled in order to reach the inner components. You will remove the battery before delving into the innards of your computer. If you just came here for a battery guide, simply follow to step two and then reassemble!

Was du brauchst

Schritt 1 Battery and Back Cover

HP Pavilion 15-ab165us Battery and Back Cover Replacement, Battery and Back Cover: Schritt 1, Bild 1 von 2

HP Pavilion 15-ab165us Battery and Back Cover Replacement, Battery and Back Cover: Schritt 1, Bild 2 von 2

Flip the computer over so that the bottom cover is facing you.
Slide the two locks to the "unlock" position and remove the battery.

Bearbeiten

Schritt 2

HP Pavilion 15-ab165us Battery and Back Cover Replacement: Schritt 2, Bild 3 von 3

Remove the two 8mm screws underneath with a Phillips #1 screwdriver.
Use a plastic opening tool to remove the plastic feet.

Bearbeiten

Plastic feet are actually the feet bezels. They snap out

Steven Wander - 21. Sep 2022 Antwort

Schritt 3

HP Pavilion 15-ab165us Battery and Back Cover Replacement: Schritt 3, Bild 3 von 3

Remove the two plastic tabs with a metal spudger.

Bearbeiten

What are the plastic tabs part number

Regina Bowman - 28. Sep 2020 Antwort

Schritt 4

Remove the sixteen 8mm screws that hold the bottom cover with a Phillips #1 screwdriver.

Bearbeiten

There are 2 under the rear foot plastic covers that are not mentioned to remove, they snap out

Steven Wander - 21. Sep 2022 Antwort

Schritt 5

Pull the Optical Drive out.

Bearbeiten

How do I pull the optical drive out if the computer is off?

killertofu - 7. Mai 2020 Antwort

Schritt 6

Remove the 3mm screws that were hidden under the Optical Drive with a Phillips #0 screwdriver.

Bearbeiten

Any other way to remove these screws? Phillips #00 wasn't working for

mjsbak - 16. Jun 2020 Antwort

I don’t see any screws here

Nancy Carr Saunders - 23. Sep 2020 Antwort

These screws are insanely tight for some reason. Only a good sharp #0 will work, otherwise you could notch the side and tap it loose CCW with a punch.

Steven Wander - 21. Sep 2022 Antwort

Unable to open these screws as they seem to be worn out… any other method would be helpful

Abhi - 20. Feb 2023 Antwort

These screws do not budge! My 0 screwdriver not working. How do we remove them?

Jules Ju - 13. Sep 2023 Antwort

Schritt 7

Flip the computer back over.
Use a plastic opening tool to release the clips holding the keyboard section in place.

Bearbeiten

What can I use if I don’t have a plastic opening tool?

Nancy Carr Saunders - 23. Sep 2020 Antwort

Schritt 8

Close the lid and pull the screen and keyboard section up and away from the disconnected bottom cover.
The hard drive is NOT screwed into place on the underside of the keyboard section.

Bearbeiten

Note that before you remove the bottom cover, there are three plastic snaps on the back of the PC where the battery would go. These have to be detached before the entire bottom cover can be freed from the top panel.

Kieran - 17. Jun 2019 Antwort

I thought there was something they missed. Mine finally seperated with a loud snap.Thought I broke something but it looks ok. These parts are pretty tough.

Steven Wander - 21. Sep 2022

The explanations are very good detailed and pictures help to understand it, however, if all the process is described in a video would be a lot better for sure.

Billmart - 29. Okt 2021 Antwort

This also works on the HP Pavilion ab130na.

Filip Olczyk - 30. Aug 2022 Antwort