Zum Hauptinhalt wechseln

Einleitung

Most components that need to be replaced are inside the base of the laptop. The computer will need to be disassembled in order to reach the inner components. You will remove the battery before delving into the innards of your computer. If you just came here for a battery guide, simply follow to step two and then reassemble!

  1. Flip the computer over so that the bottom cover is facing you. Slide the two locks to the "unlock" position and remove the battery.
    • Flip the computer over so that the bottom cover is facing you.

    • Slide the two locks to the "unlock" position and remove the battery.

  2. Remove the two 8mm screws underneath with a Phillips #1 screwdriver. Use a plastic opening tool to remove the plastic feet. Use a plastic opening tool to remove the plastic feet.
    • Remove the two 8mm screws underneath with a Phillips #1 screwdriver.

    • Use a plastic opening tool to remove the plastic feet.

  3. Remove the two plastic tabs  with a metal spudger. Remove the two plastic tabs  with a metal spudger. Remove the two plastic tabs  with a metal spudger.
    • Remove the two plastic tabs with a metal spudger.

  4. Remove the sixteen 8mm screws  that hold the bottom cover with a Phillips #1 screwdriver.
    • Remove the sixteen 8mm screws that hold the bottom cover with a Phillips #1 screwdriver.

  5. Pull the Optical Drive out.
    • Pull the Optical Drive out.

  6. Remove the 3mm screws that were hidden under the Optical Drive with a Phillips #0 screwdriver.
    • Remove the 3mm screws that were hidden under the Optical Drive with a Phillips #0 screwdriver.

  7. Flip the computer back over. Use a plastic opening tool to release the clips holding the keyboard section in place.
    • Flip the computer back over.

    • Use a plastic opening tool to release the clips holding the keyboard section in place.

  8. Close the lid and pull the screen and keyboard section up and away from the disconnected bottom cover.
    • Close the lid and pull the screen and keyboard section up and away from the disconnected bottom cover.

    • The hard drive is NOT screwed into place on the underside of the keyboard section.

Abschluss

To reassemble your device, follow these instructions in reverse order.

9 weitere Nutzer haben diese Anleitung absolviert.

Dillon Hubble

Mitglied seit: 20.10.2017

629 Reputation

3 Anleitungen geschrieben

Team

UW Tacoma, Team S1-G2, Rose Fall 2017 Mitglied von UW Tacoma, Team S1-G2, Rose Fall 2017

UWT-ROSE-F17S1G2

5 Mitglieder

14 Anleitungen geschrieben

Ein Kommentar

Where can i buy the case? I couldn’t anywhere online??

Model - HP Pavilion 15 8th gen B&O

Jackson Beno - Antwort

Kommentar hinzufügen

Seitenaufrufe:

Letzten 24 Stunden: 19

Letzten 7 Tage: 125

Letzten 30 Tage: 513

Insgesamt: 58,704