Einleitung

If your are experiencing problems with your device's Optical Drive consult this repair guide to restore your device to working order. Problems can include disks not loading, noisy disk drive, and scratching of inserted disks. To Start this guide all you need is a Phillip's head screwdriver.

Ersatzteile

Kein Ersatzteil erforderlich.

  1. Turn the device over so that the bottom is facing upward.
    • Turn the device over so that the bottom is facing upward.

    • Find the screw with an imprint of a disk underneath it. It is located near the center of the device.

    • Remove this 6mm screw with a Philips #0 screwdriver.

    • This screw is very small, make sure to have an organized place to put it.

    Kommentar hinzufügen

  2. Kostenloser Versand bei Bestellungen über 20 $
    Verwende den Code BLUEANDBLACK an der Kasse
    Kostenloser Versand bei Bestellungen über 20 $
    Verwende den Code BLUEANDBLACK
  3. The optical drive is located toward the left side of the device.
    • The optical drive is located toward the left side of the device.

    • Using a spudger, pry the optical drive away from the casing.

    • Pull the rest of the optical drive out with your hand.

    Kommentar hinzufügen

Abschluss

To reassemble your device, follow these instructions in reverse order.

Max Shangraw

Mitglied seit 19.03.2018

495 Reputation

4 Anleitungen geschrieben

Team

UMass Dartmouth, Team S6-G1, Bernier Spring 2018 Mitglied von UMass Dartmouth, Team S6-G1, Bernier Spring 2018

UMASSD-BERNIER-S18S6G1

3 Mitglieder

4 Anleitungen geschrieben

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 0

Letzte 7 Tage: 2

Letzte 30 Tage: 7

Insgesamt: 33