Einleitung

If your wifi is not working for whatever reason and you need to replace the wireless card, you've come to the right place. This guide outlines the process of replacing the wireless card, which is responsible for wifi connection. Between the clear steps and pictures, your computer should be connected to the internet in no time.

Ersatzteile

Kein Ersatzteil erforderlich.

  1. Flip the computer so that the bottom side is facing up, and locate the battery above the screen hinges.
    • Flip the computer so that the bottom side is facing up, and locate the battery above the screen hinges.

    Kommentar hinzufügen

  2. Slide the switch under the battery compartment to release the battery.
    • Slide the switch under the battery compartment to release the battery.

    Kommentar hinzufügen

    • The battery will pop out above the latch; now remove the battery.

    Kommentar hinzufügen

    • Unscrew the two silver screws holding the protective cover in place; locate the wireless card.

    • The screws will not come all the way out; stop when you hear them click.

    • Unsnap the protective cover off of the device.

    Kommentar hinzufügen

    • Undo the two screws on the corners of the wireless card.

    • Pulling towards where the wires connect with the computer itself, remove the wireless card from its slot.

    Kommentar hinzufügen

    • Unsnap the wires from the wireless card and connect them to the new card with their corresponding attachment points.

    • These points are indicated by numbered tabs. Wire #1 connects to #1 on the wireless card; this is the same for all corresponding attachments.

    Kommentar hinzufügen

Abschluss

To reassemble your device, follow these instructions in reverse order.

Shyanne Bolton

Mitglied seit 05.04.2018

399 Reputation

3 Anleitungen geschrieben

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 1

Insgesamt: 56