Zum Hauptinhalt wechseln

Diese Version enthält möglicherweise inkorrekte Änderungen. Wechsle zur letzten geprüften Version.

Was du brauchst

  1. Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!

    : Schritt 1, Bild 1 von 1
    • Flip the computer so that the bottom side is facing up, and locate the battery above the screen hinges.

  2. Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!

    : Schritt 2, Bild 1 von 1
    • Slide the switch under the battery compartment to release the battery.

  3. Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!

    : Schritt 3, Bild 1 von 1
    • Remove the battery.

    • The battery will have popped out of the compartment when it was released.

  4. Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!

    : Schritt 4, Bild 1 von 2 : Schritt 4, Bild 2 von 2
    • Unscrew the two captive screws using the Phillips #000 screwdriver.

    • The screws will not come all the way out; stop when you hear them click.

    • Unsnap the protective cover off of the device.

    • Locate the wireless card.

  5. Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!

    : Schritt 5, Bild 1 von 2 : Schritt 5, Bild 2 von 2
    • Remove the two screws located on the corners of the wireless card, using the Phillips #000 screwdriver.

    • Slide the Wi-Fi card out of the socket.

  6. Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!

    : Schritt 6, Bild 1 von 1
    • Using your fingers, unsnap the coaxial cable wires from the wireless card.

    • Connect them to the new card based on the attachment points.

    • These points are indicated by numbered tabs. For example, wire #1 connects to #1 on the wireless card.

Ziellinie

Ein:e weitere:r Nutzer:in hat diese Anleitung absolviert.

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 4

Letzte 7 Tage: 16

Letzte 30 Tage: 37

Insgesamt: 1,443