Einleitung

The fan is required to ventilate heat from the laptop and keep it from overheating. This guide will show you the steps to remove the fan from your laptop in case the fan is not working, the laptop is overheating, or needs to be replaced because it is making noise.

  1. Unplug laptop  from adapter and all other devices.
    • Unplug laptop from adapter and all other devices.

    Kommentar hinzufügen

  2. Flip the laptop over with battery facing you.
    • Flip the laptop over with battery facing you.

    Kommentar hinzufügen

    • Slide the battery lock on the right side open.

    • Slide the Battery release latch on the left side.

    Kommentar hinzufügen

    • Pull battery out.

    Kommentar hinzufügen

    • Remove the two 6.5mm Phillips #1 keyboard screws from bottom of laptop.

    Kommentar hinzufügen

    • Push screwdriver through screw hole top pop the keyboard.

    • Make sure the screen is open.

    Kommentar hinzufügen

    • Pry up the keyboard.

    • The keyboard is still attached by it's ribbon.

    Kommentar hinzufügen

    • Remove keyboard wire by popping latch under blue plastic

    Kommentar hinzufügen

    • Using the spudger to lift up on the white tabs

    • Pull horizontally on the blue ribbon to disconnect the cables

    Kommentar hinzufügen

    • Remove the five 5.5mm Phillips #1 screws from the case

    Kommentar hinzufügen

    • Remove eight 6.5mm Phillips #1 screws from the back cover

    Kommentar hinzufügen

    • Starting at a top corner, use the pry tool to split the case.

    • Slowly work around the case, pulling up gently to release the clips.

    Kommentar hinzufügen

    • Remove the three x 5.5 mm restraining screws.

    Kommentar hinzufügen

    • Pull fan of of heat pipe.

    Kommentar hinzufügen

    • Remove fan.

    Kommentar hinzufügen

Abschluss

To reassemble your device, follow these instructions in reverse order.

Sam Barkley

Mitglied seit 13.02.2018

959 Reputation

8 Anleitungen geschrieben

Team

USF Tampa, Team S11-G2, Cheng Spring 2018 Mitglied von USF Tampa, Team S11-G2, Cheng Spring 2018

USFT-CHENG-S18S11G2

4 Mitglieder

10 Anleitungen geschrieben

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 0

Letzte 7 Tage: 2

Letzte 30 Tage: 5

Insgesamt: 36