Zum Hauptinhalt wechseln

Diese Version enthält möglicherweise inkorrekte Änderungen. Wechsle zur letzten geprüften Version.

Was du brauchst

  1. Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!

    : Schritt 1, Bild 1 von 1
    • Shut down the computer.

    • Disconnect all external devices and cables from the computer.

  2. Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!

    : Schritt 2, Bild 1 von 1
    • Flip the laptop over.

  3. Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!

    : Schritt 3, Bild 1 von 2 : Schritt 3, Bild 2 von 2
    • Locate the gray sliding tab next to the black bar where the battery is located.

    • Slide the gray sliding tab to the left until you hear a distinct click.

    • The inside edge of the battery should pop up.

  4. Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!

    : Schritt 4, Bild 1 von 3 : Schritt 4, Bild 2 von 3 : Schritt 4, Bild 3 von 3
    • Grasp the inside edge of the battery.

    • Lift the inside edge of the battery up to detach the battery from the laptop.

  5. Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!

    : Schritt 5, Bild 1 von 1
    • Remove the highlighted screws.

    • After removing the screws, flip the laptop over.

  6. Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!

    : Schritt 6, Bild 1 von 2 : Schritt 6, Bild 2 von 2
    • Open the laptop.

    • Use the spudger to lift the keyboard.

    • Do not pull the keyboard up and away from the computer, because it is still attached by a ribbon cable.

    • Press the two white clips forward with your fingers and gently pull the ribbon from the clips.

  7. Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!

    : Schritt 7, Bild 1 von 1
    • Turn the laptop upside-down again.

    • Remove the highlighted screws.

  8. Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!

    : Schritt 8, Bild 1 von 2 : Schritt 8, Bild 2 von 2
    • Turn the laptop right-side up. Open the screen and tilt it all the way back.

    • Locate the media keys.

    • Gently lift up the media key strip using the plastic pry tool.

    • If there is too much resistance when prying, stop and search for cause of the resistance. Do not force the media keys.

Ziellinie

Ein:e weitere:r Nutzer:in hat diese Anleitung absolviert.

Tyler Latour

Mitglied seit: 03/12/14

266 Reputation

3 Anleitungen geschrieben

Team

UMass Dartmouth, Team 6-7, Vijaybhaskar Spring 2014 Mitglied von UMass Dartmouth, Team 6-7, Vijaybhaskar Spring 2014

UMASSD-VIJAYBHASKAR-S14S6G7

4 Mitglieder

3 Anleitungen geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 1

Letzte 7 Tage: 3

Letzte 30 Tage: 14

Insgesamt: 655