Zum Hauptinhalt wechseln

Repariere deine Sachen

Recht auf Reparatur

Store

Einleitung

This guide will help you replace the wireless card on you HP Pavilion dv2000.

Ersatzteile

Keine Ersatzteile angegeben.

  1. Make sure your computer is powered down and unplugged from the charger before removing any components. Locate and unscrew the single 3.8mm screw holding the wireless card casing in place.
    • Make sure your computer is powered down and unplugged from the charger before removing any components.

    • Locate and unscrew the single 3.8mm screw holding the wireless card casing in place.

    • Lift up and remove the wireless card casing.

    • The 3.8mm screw will remain in the wireless card casing after you unscrew it.

  2. Use a pair of tweezers to remove the three antennas from their sockets. Remove the antennas by the contacts connected to the socket, the crimps connecting the wires and the sockets are delicate and are easily damaged.
    • Use a pair of tweezers to remove the three antennas from their sockets.

    • Remove the antennas by the contacts connected to the socket, the crimps connecting the wires and the sockets are delicate and are easily damaged.

    • Remove the two 3.8mm screws holding down the wireless card with your Phillips #00 Screwdriver.

    • Gently pull out your wireless card from its top side to remove it from its holding.

Abschluss

To reassemble your device, follow these instructions in reverse order.

3 weitere Nutzer haben diese Anleitung absolviert.

Erik Muniz

Mitglied seit: 09.09.2014

822 Reputation

3 Anleitungen geschrieben

Team

CSU Fullerton, Team 2-3, Bruce Fall 2014 Mitglied von CSU Fullerton, Team 2-3, Bruce Fall 2014

CSUF-BRUCE-F14S2G3

3 Mitglieder

3 Anleitungen geschrieben

Kommentar hinzufügen

Statistik anzeigen:

Letzten 24 Stunden: 0

Letzten 7 Tage: 1

Letzten 30 Tage: 6

Insgesamt: 1,719