Diese Anleitung enthält neuere Änderungen. Wechsel zur neuesten unüberprüften Version.
Einleitung
This guide will accomplish replacing the WiFi receiver in incidents of failure.
Was du brauchst
-
-
Begin by locating the smallest panel with one screw attaching it to the laptop computer.
-
-
-
Remove the one screw holding the panel down, and the WiFi receiver will be revealed.
-
-
-
-
Remove the two screws that hold down the receiver.
-
Gently slide the chip out of the socket.
-
-
-
Remove the two wires labelled AUX and MAIN from the chip.
-
Remember where these were attached previously as it is important for proper functionality after the replacement.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.