Zum Hauptinhalt wechseln

Einleitung

How to gain access to the RTC Battery and replace it.

Ersatzteile

Keine Ersatzteile angegeben.

  1. Turn off and unplug the computer from all external power sources.
    • Turn off and unplug the computer from all external power sources.

    • Shut the screen, and lay the computer face-down on a flat, sturdy surface. Orient the computer to match the image.

    • Locate the battery release switch, as indicated in the image. Sliding this switch from right to left will release the battery.

    • Remove the battery.

  2. Remove the two 5mm screws securing the right side of the RAM cover to the computer frame. Lift the right side of the RAM cover to remove. Lift the right side of the RAM cover to remove.
    • Remove the two 5mm screws securing the right side of the RAM cover to the computer frame.

    • Lift the right side of the RAM cover to remove.

  3. The wifi card is connected to the computer with the two antenna lead wires.
    • The wifi card is connected to the computer with the two antenna lead wires.

    • Note where the white AUX wire and the black MAIN wire connect to the wifi card before disconnecting.

  4. Disconnect the antenna leads from the wifi card by lifting the gold ends of the wires off the prongs on the wifi card. The white wire connects to the AUX terminal.
    • Disconnect the antenna leads from the wifi card by lifting the gold ends of the wires off the prongs on the wifi card.

    • The white wire connects to the AUX terminal.

    • The black wire connects to the MAIN terminal.

  5. Remove the two 6.0mm screws securing the wifi card to the computer.
    • Remove the two 6.0mm screws securing the wifi card to the computer.

  6. Remove the wifi card.
    • Remove the wifi card.

  7. Remove the RTC Battery from the battery holder located under where the PCI module usually is. Remove the RTC Battery from the battery holder located under where the PCI module usually is. Remove the RTC Battery from the battery holder located under where the PCI module usually is.
    • Remove the RTC Battery from the battery holder located under where the PCI module usually is.

Abschluss

To reassemble your device, follow these instructions in reverse order.

2 weitere Nutzer haben diese Anleitung absolviert.

Farid Khoshnevissan

Mitglied seit: 11.10.2010

748 Reputation

4 Anleitungen geschrieben

Team

Cal Poly, Team 21-34, Regan Fall 2010 Mitglied von Cal Poly, Team 21-34, Regan Fall 2010

CPSU-REGAN-F10S21G34

4 Mitglieder

11 Anleitungen geschrieben

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 0

Letzte 7 Tage: 2

Letzte 30 Tage: 44

Insgesamt: 10,035