HP Pavilion dv6-6180us Motherboard Replacement

Einleitung

If you are having complications with laptop having to boot and then shutting off, or blue screens of death, you may want to replace the motherboard.

Was du brauchst

Schritt 1 Hard Drive

HP Pavilion dv6-6180us Motherboard Replacement, Hard Drive: Schritt 1, Bild 1 von 1

Turn off and unplug the device before starting.
Flip your device over so the bottom panel is facing up.

Bearbeiten

Schritt 2

Slide the lock switch to the right.
The panel will pop open at the top corner.

Bearbeiten

Schritt 3

Use the plastic opening tool to remove the back panel.
Some force may be required to remove the panel from the case. Use caution when prying to avoid breaking the panel or the plastic tabs securing it in place.

Bearbeiten

Schritt 4

Use the PH 1 screwdriver to remove the four 3.5 mm screws securing the hard drive.

Bearbeiten

Schritt 5

Lift the corner bracket to remove the hard drive.

Bearbeiten

Schritt 6

Unplug the hard drive wire to detach the hard drive.

Bearbeiten

Don't forget to unplug 2 connectors next to the drive's connector. They're not mentioned anywhere in the guide but you won't remove the motherboard with them.

Krzeszny - 12. Sep 2024 Antwort

Schritt 7 Motherboard

HP Pavilion dv6-6180us Motherboard Replacement, Motherboard: Schritt 7, Bild 1 von 2

HP Pavilion dv6-6180us Motherboard Replacement, Motherboard: Schritt 7, Bild 2 von 2

Remove a 3.5 mm screw that is securing DVD player with screwdriver PH1.

Bearbeiten

Schritt 8

Slide DVD player to the left and pull to remove completely.

Bearbeiten

Schritt 9

Unscrew four 3.5 mm screws from the inside of the battery compartment with PH 1 screwdriver.
Unscrew nine 5 mm screws with PH 1 screwdriver.
Unscrew four 4 mm screws with PH 1 screwdriver.

Bearbeiten

Schritt 10

Flip side up and open laptop.
Pry open the keyboard using a plastic opening tool starting from the top.
Lift up keyboard gently because a silver ribbon is still attaching it to the laptop.