Einleitung

If your hard drive is not working or you want to add in a larger hard drive, follow this guide.

Remove the two screws from the hard drive shield and lift it off starting at the right side.  The screws will remain in the shield.
  • Remove the two screws from the hard drive shield and lift it off starting at the right side. The screws will remain in the shield.

Kommentar hinzufügen

Pull the plastic tab attached to the hard drive. The hard drive lifts right out.  Pull gently so you don't damage the contacts.
  • Pull the plastic tab attached to the hard drive. The hard drive lifts right out. Pull gently so you don't damage the contacts.

Kommentar hinzufügen

  • Now you have your hard drive out!

Kommentar hinzufügen

  • Gently pull forward the HP adapter from the top of the hard drive.

  • Insert the adapter onto the new SATA hard drive, to be replaced in the laptop.

Kommentar hinzufügen

Abschluss

To reassemble your device, follow these instructions in reverse order.

13 weitere Nutzer haben diese Anleitung absolviert.

Ben Hirsch

Mitglied seit 05.10.2010

3.589 Reputation

10 Anleitungen geschrieben

Team

Cal Poly, Team 21-33, Regan Fall 2010 Mitglied von Cal Poly, Team 21-33, Regan Fall 2010

CPSU-REGAN-F10S21G33

4 Mitglieder

10 Anleitungen geschrieben

thanks for your help

moyguens - Antwort

I was scratching my head when I recvd the new hd w/out the adapter... LOL! thanks

gilaraujog - Antwort

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 7

Letzte 7 Tage: 44

Letzte 30 Tage: 196

Insgesamt: 33,842