Zum Hauptinhalt wechseln

Diese Anleitung enthält neuere Änderungen. Wechsel zur neuesten unüberprüften Version.

HP Pavilion dv6000 Wireless Card Replacement

Was du brauchst

  1. HP Pavilion dv6000 Wireless Card Replacement, Wireless Card: Schritt 1, Bild 1 von 1
    • Lay the laptop on a flat surface, battery side up.

    • Remove the two screws securing the RAM shield to the lower case.

    • The screws will remain captive within the shield.

    • Lift and remove the RAM shield up from the lower case.

  2. HP Pavilion dv6000 Wireless Card Replacement: Schritt 2, Bild 1 von 2 HP Pavilion dv6000 Wireless Card Replacement: Schritt 2, Bild 2 von 2
    • Use a pair of tweezers to disconnect both antennas from their sockets on the wireless card.

    • Be careful to pull on the contacts and not the wires. The crimps used to hold them to the wires are delicate.

  3. HP Pavilion dv6000 Wireless Card Replacement: Schritt 3, Bild 1 von 1
    • Remove the two 3.7 mm Phillips screws securing the wireless card to the motherboard.

    • Upon removing the Phillips screws that secures the wireless card to the motherboard, the wireless card board should pop up from its top side.

    • Grasp the wireless card and pull it straight out of its socket on the motherboard.

  4. HP Pavilion dv6000 Wireless Card Replacement: Schritt 4, Bild 1 von 1
    • Wireless card remains.

Abschluss

To reassemble your device, follow these instructions in reverse order.

5 weitere Nutzer:innen haben diese Anleitung absolviert.

Ben Hirsch

Mitglied seit: 10/05/10

3.826 Reputation

10 Anleitungen geschrieben

Team

Cal Poly, Team 21-33, Regan Fall 2010 Mitglied von Cal Poly, Team 21-33, Regan Fall 2010

CPSU-REGAN-F10S21G33

4 Mitglieder

12 Anleitungen geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 2

Letzte 7 Tage: 2

Letzte 30 Tage: 7

Insgesamt: 26,667