Einleitung

This is a RAM replacement for HP Pavilion dv7t-7000.

Ersatzteile

Kein Ersatzteil erforderlich.

  1. Turn the computer off and disconnect if from all power sources.
    • Turn the computer off and disconnect if from all power sources.

  2. Slide the battery release switch to the left.
    • Slide the battery release switch to the left.

  3. Hold the release switch all of the way to the left and your other hand to pull the battery out.
    • Hold the release switch all of the way to the left and your other hand to pull the battery out.

  4. Kostenloser Versand für alle Bestellungen über 100 $ oder mit einem Pro Tech Toolkit!

    Schau dich im Store um
  5. Unscrew the single Phillips #00 screw.
    • Unscrew the single Phillips #00 screw.

    • Screw will not come out, it is connected to the panel

  6. Remove service hatch by sliding away from the computer and lifting up. Remove service hatch by sliding away from the computer and lifting up.
    • Remove service hatch by sliding away from the computer and lifting up.

  7. Push the retraining springs away from the RAM at the same time to unlock the RAM. Push the retraining springs away from the RAM at the same time to unlock the RAM.
    • Push the retraining springs away from the RAM at the same time to unlock the RAM.

  8. Pull the RAM out. Follow the same procedure for the additional RAM.
    • Pull the RAM out.

    • Follow the same procedure for the additional RAM.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Afnan

Mitglied seit: 21.02.2018

289 Reputation

3 Anleitungen geschrieben

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 3

Insgesamt: 73