The large back panel contains a lot of screws that help keep it in tact. It covers and protects the majority of your device's insides. It can be somewhat tricky to remove.


Kein Ersatzteil erforderlich.

  1. Slide pill shaped tab to the other side of the channel.
    • Slide pill shaped tab to the other side of the channel.

    Kommentar hinzufügen

    • Remove battery while keeping the tab to the side.

    Kommentar hinzufügen

    • Unscrew the two screws JIS #0 located on opposites sides of the panel.

    • Screws are attached to the panel and will not fully come out.

    Kommentar hinzufügen

    • Carefully pry off the L-shaped panel.

    Kommentar hinzufügen

    • Unscrew all nine 6.0mm JIS #0 screws located on the border of the back panel.

    Kommentar hinzufügen

    • Remove 3 screws located where the battery previously was.

    Kommentar hinzufügen

    • Remove 6 screws located under the spot where the smaller L-shaped panel was located.

    Kommentar hinzufügen

    • Slowly pry off the keyboard from the back panel.

    • Between the back panel and the keyboard there are two ribbon wires.

    • Remove slowly to not break the back panel. If it does not come off easily, check to see if all screws are removed.

    Kommentar hinzufügen

    • Unplug wires connecting back panel to keyboard.

    Kommentar hinzufügen


To reassemble your device, follow these instructions in reverse order.

Robert Hamilton

Mitglied seit 01.03.2018

1.051 Reputation

10 Anleitungen geschrieben


UMass Dartmouth, Team S2-G7, Simcock Spring 2018 Mitglied von UMass Dartmouth, Team S2-G7, Simcock Spring 2018


4 Mitglieder

10 Anleitungen geschrieben

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 0

Letzte 7 Tage: 2

Letzte 30 Tage: 6

Insgesamt: 67