Zum Hauptinhalt wechseln

HP Pavilion x2 10-n113dx Mainboard Replacement

Was du brauchst

  1. HP Pavilion x2 10-n113dx  Mainboard Replacement, Battery: Schritt 1, Bild 1 von 3 HP Pavilion x2 10-n113dx  Mainboard Replacement, Battery: Schritt 1, Bild 2 von 3 HP Pavilion x2 10-n113dx  Mainboard Replacement, Battery: Schritt 1, Bild 3 von 3
    • Before starting, please turn off your laptop.

    • Using the blue plastic opening tool or a flat bladed tool, carefully slide the blade in between the display panel and gently slide to prop open the assembly.

  2. HP Pavilion x2 10-n113dx  Mainboard Replacement: Schritt 2, Bild 1 von 2 HP Pavilion x2 10-n113dx  Mainboard Replacement: Schritt 2, Bild 2 von 2
    • Gently lift and remove the display panel from the assembly.

    • Remove the translucent yellow tape that covers the battery connector on the mainboard.

    • The tape will be in the way for a future step.

  3. HP Pavilion x2 10-n113dx  Mainboard Replacement: Schritt 3, Bild 1 von 3 HP Pavilion x2 10-n113dx  Mainboard Replacement: Schritt 3, Bild 2 von 3 HP Pavilion x2 10-n113dx  Mainboard Replacement: Schritt 3, Bild 3 von 3
    • Flip up the small white colored locking flap using the tip of a spudger or your fingernail. Then the ribbon cable can be removed easily without much effort.

    • Carefully disconnect the white ribbon cable from the mainboard.

  4. HP Pavilion x2 10-n113dx  Mainboard Replacement: Schritt 4, Bild 1 von 3 HP Pavilion x2 10-n113dx  Mainboard Replacement: Schritt 4, Bild 2 von 3 HP Pavilion x2 10-n113dx  Mainboard Replacement: Schritt 4, Bild 3 von 3
    • Carefully disconnect the battery cable from its connector on the mainboard.

  5. HP Pavilion x2 10-n113dx  Mainboard Replacement: Schritt 5, Bild 1 von 3 HP Pavilion x2 10-n113dx  Mainboard Replacement: Schritt 5, Bild 2 von 3 HP Pavilion x2 10-n113dx  Mainboard Replacement: Schritt 5, Bild 3 von 3
    • Using the Phillips #0 screwdriver, carefully remove the 4 corner screws that hold the battery to the display panel.

    • 3 screws are 3.12 mm head, 2.40 mm length, and 1 screw is 5.85mm head, 2.5mm length.

    • Remove the battery from the device.

    How do you replace those magnets that help snap the laptop's into place?

    Alfa Orellana - Antwort

  6. HP Pavilion x2 10-n113dx  Mainboard Replacement, Mainboard: Schritt 6, Bild 1 von 3 HP Pavilion x2 10-n113dx  Mainboard Replacement, Mainboard: Schritt 6, Bild 2 von 3 HP Pavilion x2 10-n113dx  Mainboard Replacement, Mainboard: Schritt 6, Bild 3 von 3
    • To unscrew the mainboard use the Phillips #0 Screwdriver to remove two types of screws. Three 4.15mm head, 2.35mm in length screws and three 3.32mm head, 3.99mm in length screws

  7. HP Pavilion x2 10-n113dx  Mainboard Replacement: Schritt 7, Bild 1 von 3 HP Pavilion x2 10-n113dx  Mainboard Replacement: Schritt 7, Bild 2 von 3 HP Pavilion x2 10-n113dx  Mainboard Replacement: Schritt 7, Bild 3 von 3
    • Remove mainboard.

Abschluss

To reassemble your device, follow these instructions in reverse order.

4 weitere Nutzer:innen haben diese Anleitung absolviert.

Team

USF Tampa, Team S13-G4, Boczar Fall 2017 Mitglied von USF Tampa, Team S13-G4, Boczar Fall 2017

USFT-BOCZAR-F17S13G4

4 Mitglieder

5 Anleitungen geschrieben

4 Kommentare

Is this about the WiFi card? Because I cant see the SSD in any of your pictures.

Julian Lemmerich - Antwort

So, where is the SSD? You’ve taken apart the whole logic board, but not evidence of any SSD module from your photos….

Matteo Repossi - Antwort

It is not SSD drive, it is a motherboard

Da K - Antwort

has anyone figured out where is the SSD (eMMC) by the way ?

Karantez Jegou - Antwort

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 4

Letzte 30 Tage: 22

Insgesamt: 7,386