Shut the device off. Lift the top cover of the scanner. Carefully, pry the plastic frame surrounding the glass away from the printer hood using a plastic prying tool.
  • Shut the device off.

  • Lift the top cover of the scanner.

  • Carefully, pry the plastic frame surrounding the glass away from the printer hood using a plastic prying tool.

  • Pull the frame out.

Kommentar hinzufügen

Unscrew the two screws that fasten the frame to the printer hood. Use a T10 screwdriver
  • Unscrew the two screws that fasten the frame to the printer hood. Use a T10 screwdriver

Kommentar hinzufügen

Pushing the clip behind the cover piece in, pull the cover piece outwards. Pushing the clip behind the cover piece in, pull the cover piece outwards.
  • Pushing the clip behind the cover piece in, pull the cover piece outwards.

Kommentar hinzufügen

Remove the two screws on the front of the printer with a T10 screwdriver. The first is inside the power button panel space and the second is across the printer slider.
  • Remove the two screws on the front of the printer with a T10 screwdriver.

    • The first is inside the power button panel space and the second is across the printer slider.

Kommentar hinzufügen

Pull the circuit board from the power button panel space.
  • Pull the circuit board from the power button panel space.

  • Unplug the small ribbon cable from the circuit board.

Kommentar hinzufügen

Pull the memory card reader's circuit board out of its slot. Detach the rainbow connector from the back of the circuit board.
  • Pull the memory card reader's circuit board out of its slot.

  • Detach the rainbow connector from the back of the circuit board.

Kommentar hinzufügen

Press the clip directly behind the TouchSmart panel and pull the panel up. Disconnect the ribbon cable from the TouchSmart panel. This detaches the panel from the printer body.
  • Press the clip directly behind the TouchSmart panel and pull the panel up.

  • Disconnect the ribbon cable from the TouchSmart panel. This detaches the panel from the printer body.

  • Do not hesitate to use force to remove the TouchSmart panel.

Kommentar hinzufügen

Grip the printer hood and pull upward.
  • Grip the printer hood and pull upward.

Kommentar hinzufügen

With the top half of the printer separated, lift the upper section with the scanner glass away from the lower section of the printer.
  • With the top half of the printer separated, lift the upper section with the scanner glass away from the lower section of the printer.

Kommentar hinzufügen

With the glass facing upwards, remove the screw holding the glass in place. With the glass facing upwards, remove the screw holding the glass in place.
  • With the glass facing upwards, remove the screw holding the glass in place.

Kommentar hinzufügen

Lift the glass up and away from the printer.
  • Lift the glass up and away from the printer.

  • Handle glass with care.

  • Replace the broken glass piece with the replacement glass

Kommentar hinzufügen

Abschluss

To reassemble your device, follow these instructions in reverse order.

Ein weiterer Nutzer hat diese Anleitung absolviert.

garrett hall

Mitglied seit 26.09.2012

19 Reputation

2 Anleitungen geschrieben

Team

Cal Poly, Team 2-11, Propen Fall 2012 Mitglied von Cal Poly, Team 2-11, Propen Fall 2012

CPSU-PROPEN-F12S2G11

4 Mitglieder

6 Anleitungen geschrieben

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 0

Letzte 7 Tage: 2

Letzte 30 Tage: 11

Insgesamt: 2,278