Zum Hauptinhalt wechseln

Einleitung

This guide will show you how to pry open the screen and replace the front-facing camera.

Ersatzteile

Keine Ersatzteile angegeben.

  1. Secure the suction cup to the center of the screen. Using a plastic opening tool, pry along the edges of the display while pulling upwards with the suction cup.
    • Secure the suction cup to the center of the screen.

    • Using a plastic opening tool, pry along the edges of the display while pulling upwards with the suction cup.

  2. Use the Spudger  to disconnect the ribbon cable to the upper camera by prying the connector away from the board.
    • Use the Spudger to disconnect the ribbon cable to the upper camera by prying the connector away from the board.

  3. Use ESD safe tweezers to pry the camera away from the motherboard starting at the side opposite the ribbon cable.
    • Use ESD safe tweezers to pry the camera away from the motherboard starting at the side opposite the ribbon cable.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Andrew Hall

Mitglied seit: 23.05.2016

322 Reputation

3 Anleitungen geschrieben

Team

IUPUI, Team 1-4, Renguette SU 2016 Mitglied von IUPUI, Team 1-4, Renguette SU 2016

IUPUI-RENGUETTE-SU16S1G4

4 Mitglieder

6 Anleitungen geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzten 24 Stunden: 0

Letzten 7 Tage: 0

Letzten 30 Tage: 1

Insgesamt: 178