Diese Anleitung enthält neuere Änderungen. Wechsel zur neuesten unüberprüften Version.
Einleitung
The purpose of this guide is to instruct the reader on how to replace the joypad of their HP iPAQ H2200 device.
Was du brauchst
-
-
Press down and push the black side strips toward the top of the device to remove them.
-
-
-
-
Using the T5 Torx screwdriver, remove all six screws on the back and all screws on each side of the device.
-
-
-
Remove the back faceplate by pushing and loosening the 4 side slots (2 on each side).
-
-
-
Remove the main board by pushing outward on the two tabs located on each side near the bottom of the device.
-
-
-
Press on the four joypad tabs on the back, and push it through and out the front.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.