Einleitung

This step-by-step guide illustrates how to remove and replace the back case of a Pocket PC.

Ersatzteile

Kein Ersatzteil erforderlich.

Slide the silver release tab up and simultaneously lift the cover up from the left side.
  • Slide the silver release tab up and simultaneously lift the cover up from the left side.

Kommentar hinzufügen

Push the tab from left to right to remove the cover.
  • Push the tab from left to right to remove the cover.

Kommentar hinzufügen

Now lift the battery up and away from the device to remove it.
  • Now lift the battery up and away from the device to remove it.

Kommentar hinzufügen

Remove the four silver screws (T5 x .25 in).
  • Remove the four silver screws (T5 x .25 in).

Kommentar hinzufügen

Remove the single black screw (T5 x .125 in) beneath the HP sticker.
  • Remove the single black screw (T5 x .125 in) beneath the HP sticker.

Kommentar hinzufügen

Next, use your plastic removal tool to separate the gray back from the black center piece. For better results, start the separation at the corner piece.
  • Next, use your plastic removal tool to separate the gray back from the black center piece.

  • For better results, start the separation at the corner piece.

Kommentar hinzufügen

Remove the back case.
  • Remove the back case.

Kommentar hinzufügen

Abschluss

To reassemble your device, follow these instructions in reverse order.

3 weitere Nutzer haben diese Anleitung absolviert.

John Pagliero

Mitglied seit 27.01.2011

886 Reputation

7 Anleitungen geschrieben

Team

Cal Poly, Team 3-39, Regan Winter 2011 Mitglied von Cal Poly, Team 3-39, Regan Winter 2011

CPSU-REGAN-W11S3G39

4 Mitglieder

7 Anleitungen geschrieben

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 3

Insgesamt: 669