Zum Hauptinhalt wechseln

Fix Your Stuff

Right to Repair

Parts & Tools

Einleitung

If the CPU fan becomes to filled with dust or stops spinning, it must be replaced immediately. If it is not replaced then the CPU or motherboard can become damaged and cause the computer to be unbootable

Werkzeuge

Ersatzteile

  1. Lay the tower down carefully on its right side, with the vents pointing up. Lay the tower down carefully on its right side, with the vents pointing up.
    • Lay the tower down carefully on its right side, with the vents pointing up.

  2. Use the flat head #6 screwdriver bit to unscrew the tower casing. Very gently slide the case towards you. Lift the casing up and gently place it off to the side.
    • Use the flat head #6 screwdriver bit to unscrew the tower casing.

    • Very gently slide the case towards you.

    • Lift the casing up and gently place it off to the side.

  3. Unplug the fan from the motherboard by gently grasping the connector and slowing pulling up. Remove each screw from the fan using the Phillips head screwdriver bit. Place the screws in a cup, they are very small and can be lost easily.
    • Unplug the fan from the motherboard by gently grasping the connector and slowing pulling up.

    • Remove each screw from the fan using the Phillips head screwdriver bit.

    • Place the screws in a cup, they are very small and can be lost easily.

    • Remove the old fan from the CPU.

Abschluss

To reassemble your device, follow these instructions in reverse order. Now you should feel confident replacing the CPU fan in your HP desktop without any difficulties.

Amanda Milby

Mitglied seit: 13.09.2018

117 Reputation

1 Anleitung geschrieben

Team

Pasco Hernando, Team S5-G73, Prince Fall 2018 Mitglied von Pasco Hernando, Team S5-G73, Prince Fall 2018

PHSC-PRINCE-F18S5G73

1 Mitglied

1 Anleitung geschrieben

Kommentar hinzufügen

Statistik anzeigen:

Letzten 24 Stunden: 0

Letzten 7 Tage: 7

Letzten 30 Tage: 35

Insgesamt: 267