Zum Hauptinhalt wechseln

Diese Anleitung enthält neuere Änderungen. Wechsel zur neuesten unüberprüften Version.

HTC Thunderbolt Rear Inner Frame Replacement

Was du brauchst

  1. HTC Thunderbolt Rear Inner Frame Replacement, Rear Panel: Schritt 1, Bild 1 von 1
    • Insert the plastic opening tool into the top of the Thunderbolt near the power button.

    • Gently pry up on the rear panel around the edges until it is loose.

  2. HTC Thunderbolt Rear Inner Frame Replacement: Schritt 2, Bild 1 von 1
    • Lift and remove the rear panel.

  3. HTC Thunderbolt Rear Inner Frame Replacement, Battery: Schritt 3, Bild 1 von 2 HTC Thunderbolt Rear Inner Frame Replacement, Battery: Schritt 3, Bild 2 von 2
    • Using the plastic opening tool, lift up the battery from the bottom near the kickstand.

    • Remove the battery from the inner frame.

  4. HTC Thunderbolt Rear Inner Frame Replacement, MicroSD Card: Schritt 4, Bild 1 von 2 HTC Thunderbolt Rear Inner Frame Replacement, MicroSD Card: Schritt 4, Bild 2 von 2
    • Use your finger to push the MicroSD card in towards the top of the phone, allowing it to be released from the casing.

  5. HTC Thunderbolt Rear Inner Frame Replacement: Schritt 5, Bild 1 von 1
    • Use tweezers to grab onto the MicroSD card and carefully remove it from the casing.

  6. HTC Thunderbolt Rear Inner Frame Replacement, Rear Frame: Schritt 6, Bild 1 von 1
    • Remove the six Phillips screws from the perimeter of the rear frame.

    • By removing the screw with the "void" sticker on it, your Thunderbolt will no longer be covered under warranty.

  7. HTC Thunderbolt Rear Inner Frame Replacement: Schritt 7, Bild 1 von 2 HTC Thunderbolt Rear Inner Frame Replacement: Schritt 7, Bild 2 von 2
    • Insert the plastic opening tool into the bottom of the phone underneath the soft keys.

    • Gently pry up on the plastic cover by sliding the plastic opening tool across the bottom of the phone.

    • Remove the plastic cover.

    • The plastic cover will have adhesive on it making it difficult to remove.

  8. HTC Thunderbolt Rear Inner Frame Replacement: Schritt 8, Bild 1 von 1
    • Remove the two Phillips screws where the plastic cover was.

  9. HTC Thunderbolt Rear Inner Frame Replacement: Schritt 9, Bild 1 von 2 HTC Thunderbolt Rear Inner Frame Replacement: Schritt 9, Bild 2 von 2
    • Insert the plastic opening tool in between the screen and the frame on the side of the phone.

    • Slowly slide the the plastic opening tool along the side of the phone until the screen begins to separate from the frame.

    • Do the same for the opposite side of the phone.

  10. HTC Thunderbolt Rear Inner Frame Replacement: Schritt 10, Bild 1 von 3 HTC Thunderbolt Rear Inner Frame Replacement: Schritt 10, Bild 2 von 3 HTC Thunderbolt Rear Inner Frame Replacement: Schritt 10, Bild 3 von 3
    • Carefully separate the screen and phone from the rear frame, starting from the bottom.

    • Gently pull down on the phone and screen to fully separate it from the rear frame.

  11. HTC Thunderbolt Rear Inner Frame Replacement, Rear Inner Frame: Schritt 11, Bild 1 von 1
    • Remove the two Phillips screws securing rear inner frame to device.

  12. HTC Thunderbolt Rear Inner Frame Replacement: Schritt 12, Bild 1 von 1
    • Insert the plastic opening tool between the rear inner frame and the motherboard and slowly work your way around the device.

  13. HTC Thunderbolt Rear Inner Frame Replacement: Schritt 13, Bild 1 von 2 HTC Thunderbolt Rear Inner Frame Replacement: Schritt 13, Bild 2 von 2
    • Remove the rear inner frame from the rest of the device.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Team

Cal Poly, Team 19-45, Regan Winter 2013 Mitglied von Cal Poly, Team 19-45, Regan Winter 2013

CPSU-REGAN-W13S19G45

4 Mitglieder

24 Anleitungen geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 1

Letzte 30 Tage: 1

Insgesamt: 403