Einleitung

Replacement of the HTC Touch Pro's usb logic board.

Ersatzteile

Kein Ersatzteil erforderlich.

Gently press on back plate, push toward camera direction.
  • Gently press on back plate, push toward camera direction.

Kommentar hinzufügen

Use finger to lift up an edge of battery.
  • Use finger to lift up an edge of battery.

Kommentar hinzufügen

  • Remove 4 screws circled in red using T6 screw driver.

Kommentar hinzufügen

  • Lift plastic cover near Memory card slot.

Kommentar hinzufügen

  • Remove two Phillips #00 screws from the backside of the screen.

Kommentar hinzufügen

  • Insert a spudger or plastic opening tool into the seam on the side of the phone.

  • Gently pry apart the two halves of the phone.

  • Work your way around the phone until the two halves separate.

Kommentar hinzufügen

  • Gently unplug connectors marked with blue rectangle.

  • Remove screws circled in red with 00 Phillip screw driver.

Which screws in red? There aren't any.

Calion - Antwort

They are marked up in red in the second picture.

Jake Devincenzi -

  • Gently lift logic board using plastic opener tool.

  • Be aware of antenna

Kommentar hinzufügen

Abschluss

To reassemble your device, follow these instructions in reverse order.

Zhaowei Zhang

Mitglied seit 28.04.2011

112 Reputation

4 Anleitungen geschrieben

Team

CSU Los Angeles, Team 1-6, Nelson Spring 2011 Mitglied von CSU Los Angeles, Team 1-6, Nelson Spring 2011

CSULA-NELSON-S11S1G6

3 Mitglieder

4 Anleitungen geschrieben

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 0

Insgesamt: 2,899