Einleitung
Use this guide to disassemble and replace your broken touchpad.
Was du brauchst
-
-
First step is to get your tools ready for use.
-
-small screwdriver with a variety of attatchments
-
-plastic miniature prybar
-
-
-
-
Remove back cover by pushing the cover away from the charger port.
-
Remove battery. This step is VERY important.
-
Remove 2 small screws beneath battery tray.
-
** note, one of the 2 screws is underneath the void sticker, removing this sticker will void the warranty on your phone
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Rückgängig: Ich habe diese Anleitung nicht absolviert.
6 weitere Nutzer:innen haben diese Anleitung absolviert.
Team
Cuesta, Team 1-4, Zipperian Fall 2011 Mitglied von Cuesta, Team 1-4, Zipperian Fall 2011
CUESTA-ZIPPERIAN-F11S1G4
3 Mitglieder
4 Anleitungen geschrieben
