1. Use a #0 Phillips head screwdriver and unscrew the sixteen 7mm screws on the back of the device.
    • Use a #0 Phillips head screwdriver and unscrew the sixteen 7mm screws on the back of the device.

  2. Use a plastic opening tool to take off the back plastic panel. Use a plastic opening tool to take off the back plastic panel. Use a plastic opening tool to take off the back plastic panel.
    • Use a plastic opening tool to take off the back plastic panel.

  3. Kostenloser Versand für alle Bestellungen über 100 $ oder mit einem Pro Tech Toolkit!

    Schau dich im Store um
  4. Use a Phillips #0 head screwdriver to remove the four 7mm screws that hold the battery in place.
    • Use a Phillips #0 head screwdriver to remove the four 7mm screws that hold the battery in place.

  5. Gently pry off the connecting wires with the plastic opening tool. Gently pry off the connecting wires with the plastic opening tool.
    • Gently pry off the connecting wires with the plastic opening tool.

  6. Lift the battery out. Lift the battery out.
    • Lift the battery out.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Desiree Mora

Mitglied seit: 14.02.2018

265 Reputation

3 Anleitungen geschrieben

Team

USF Tampa, Team S6-G6, Eyestone Spring 2018 Mitglied von USF Tampa, Team S6-G6, Eyestone Spring 2018

USFT-EYESTONE-S18S6G6

3 Mitglieder

6 Anleitungen geschrieben

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 0

Letzte 7 Tage: 1

Letzte 30 Tage: 5

Insgesamt: 68