Zum Hauptinhalt wechseln

Hipstreet Equinox 2 Camera Replacement

Was du brauchst

  1. Hipstreet Equinox 2 Camera Replacement, Rear Case: Schritt 1, Bild 1 von 1
    • Remove the two 3mm screws using a PH00 screwdriver.

  2. Hipstreet Equinox 2 Camera Replacement: Schritt 2, Bild 1 von 1
    • Use the blue plastic opening tool to gently pry the back case off.

  3. Hipstreet Equinox 2 Camera Replacement, Camera: Schritt 3, Bild 1 von 1
    • Lift the tab on the wire ribbon shown here

  4. Hipstreet Equinox 2 Camera Replacement: Schritt 4, Bild 1 von 1
    • Pull up gently on the camera housing shown on this picture, it is glued in place.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Team

Clemson, Team 15-8, Shirley Winter 2015 Mitglied von Clemson, Team 15-8, Shirley Winter 2015

CLEM-SHIRLEY-W15S15G8

5 Mitglieder

12 Anleitungen geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 0

Insgesamt: 121