Zum Hauptinhalt wechseln

Hipstreet Equinox 2 Speaker Replacement

Was du brauchst

  1. Hipstreet Equinox 2 Speaker Replacement, Rear Case: Schritt 1, Bild 1 von 1
    • Remove the two 3mm screws using a PH00 screwdriver.

  2. Hipstreet Equinox 2 Speaker Replacement: Schritt 2, Bild 1 von 1
    • Use the blue plastic opening tool to gently pry the back case off.

  3. Hipstreet Equinox 2 Speaker Replacement, Speaker: Schritt 3, Bild 1 von 1
    • Use a plastic opening tool to remove the speakers from the case.

    • Desolder the wires from the motherboard.

    • Be sure to note which wire, red or black, corresponds to which connection on the motherboard.

  4. Hipstreet Equinox 2 Speaker Replacement: Schritt 4, Bild 1 von 1
    • Solder the wires of the new speaker to the motherboard as shown in the image.

  5. Hipstreet Equinox 2 Speaker Replacement: Schritt 5, Bild 1 von 1
    • Glue the speakers flat against their respective sound output panels with the silver sides facing out/towards the interior of the tablet.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Ein:e weitere:r Nutzer:in hat diese Anleitung absolviert.

Joel Miller

Mitglied seit: 01/29/15

119 Reputation

1 Anleitung geschrieben

Team

Clemson, Team 15-8, Shirley Winter 2015 Mitglied von Clemson, Team 15-8, Shirley Winter 2015

CLEM-SHIRLEY-W15S15G8

5 Mitglieder

12 Anleitungen geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 1

Insgesamt: 199