Einleitung

This guide will show you how to open dissemble the handle and replace the motherboard. You might need to do this if the device has power but fails to turn on. Remember to remove the battery from the device.

Ersatzteile

Kein Ersatzteil erforderlich.

  1. Remove the single 15mm Phillips #1 screw from the handle.
    • Remove the single 15mm Phillips #1 screw from the handle.

  2. Remove the handle by pulling it up.
    • Remove the handle by pulling it up.

    • Remove two 15mm Phillips #1 screws from the handle.

    • Use a plastic opening tool to carefully pry the black cover off of the handle.

    • Remove five 15mm Phillips #1 black screws from the handle.

    • Remove the silver plastic cover using the plastic opening tool.

    • Remove the black rubber cover from the motherboard.

    • Remove two 8mm Phillips #1 screws from the motherboard.

    • Carefully pull the motherboard out with its attached wires.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Ein weiterer Nutzer hat diese Anleitung absolviert.

Sara Vlhova

Mitglied seit 25.01.2018

496 Reputation

4 Anleitungen geschrieben

Team

USF Tampa, Team S7-G4, Passmore Spring 2018 Mitglied von USF Tampa, Team S7-G4, Passmore Spring 2018

USFT-PASSMORE-S18S7G4

4 Mitglieder

6 Anleitungen geschrieben

Statistik anzeigen:

Letzte 24 Stunden: 0

Letzte 7 Tage: 3

Letzte 30 Tage: 8

Insgesamt: 96