Einleitung

The hose creates a pathway for water to flow from the dirty and clean water tanks on your Hoover Power Path Pro Advanced. However, if there is a puncture in the hose, then it needs to be replaced.

Ersatzteile

Kein Ersatzteil erforderlich.

  1. Unplug the vacuum cleaner from the wall outlet before starting.  Make sure the water tanks are empty.
    • Unplug the vacuum cleaner from the wall outlet before starting. Make sure the water tanks are empty.

    • Lay the cleaner down horizontally with its wheels closest to the floor.

    Kommentar hinzufügen

  2. Hold the lower brush roll with both hands and pull outwards until it is detached.
    • Hold the lower brush roll with both hands and pull outwards until it is detached.

    Kommentar hinzufügen

    • Unscrew the 6 marked screws using a Phillips #2 head screwdriver.

    • Remove the brush roller.

    Kommentar hinzufügen

    • Use a long #2 Philips head screwdriver to remove the 8 numbered screws on the bottom of the cleaner.

      • They will also be indicated on the bottom of the vacuum.

    Kommentar hinzufügen

    • Pull the red handle shown to remove the front suction unit from the cleaner.

    Kommentar hinzufügen

    • Unscrew the Phillips #2 screw at the bottom of the hose.

    Kommentar hinzufügen

    • Grab the attachment at tip of the hose and unscrew it. Pull outwards on the hose until completely removed.

    Kommentar hinzufügen

Abschluss

To reassemble your device, follow these instructions in reverse order.

Ein weiterer Nutzer hat diese Anleitung absolviert.

Jose Andres Gonzalez Valdes

Mitglied seit 22.01.2018

658 Reputation

5 Anleitungen geschrieben

Team

Cal Poly, Team S16-G5, Banghart Winter 2018 Mitglied von Cal Poly, Team S16-G5, Banghart Winter 2018

CPSU-BANGHART-W18S16G5

5 Mitglieder

9 Anleitungen geschrieben

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 4

Letzte 7 Tage: 21

Letzte 30 Tage: 112

Insgesamt: 496