Einleitung
The hose creates a pathway for water to flow from the dirty and clean water tanks on your Hoover Power Path Pro Advanced. However, if there is a puncture in the hose, then it needs to be replaced.
Was du brauchst
-
-
Lay the cleaner down horizontally with its wheels closest to the floor.
-
-
-
Hold the lower brush roll with both hands and pull outwards until it is detached.
-
-
-
Unscrew the 6 marked screws using a Phillips #2 head screwdriver.
-
Remove the brush roller.
Removing long roller brush is not required and can’t be done at this point because of belt.
-
-
-
-
Use a long #2 Philips head screwdriver to remove the 8 numbered screws on the bottom of the cleaner.
-
-
-
Pull the red handle shown to remove the front suction unit from the cleaner.
I need to find a front suction unit for this exact carpet cleaner
Does anyone know where i can get a new front suction unit for this style carpet cleaner
-
-
-
Grab the attachment at tip of the hose and unscrew it. Pull outwards on the hose until completely removed.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Rückgängig: Ich habe diese Anleitung nicht absolviert.
3 weitere Nutzer:innen haben diese Anleitung absolviert.
Team
Cal Poly, Team S16-G5, Banghart Winter 2018 Mitglied von Cal Poly, Team S16-G5, Banghart Winter 2018
CPSU-BANGHART-W18S16G5
5 Mitglieder
15 Anleitungen geschrieben
4 Kommentare
Complete waste of $$, won’t pick up water unless you apply about 40 lbs of downward force on the %#*@ thing, I tried all the trouble shooting tips, no change, maybe used 3 times. The attachment same thing nada. Basically a toy.
I've been trying to find the hose for mine for two years now I even called hoover and they tell me it's unavailable maybe I need to find a Hoover scrap yard lol if anyone knows where I can get one please let me know via email at jefferyalger1959@gmail.com
I have to rollers on mine.
poco24 - Antwort
I have two rollers on mine.
poco24 - Antwort