Diese Anleitung enthält neuere Änderungen. Wechsel zur neuesten unüberprüften Version.
Einleitung
This Guide shows you how to replace the handle.
Was du brauchst
-
-
Push the button on the top of the clean water/solutions tank and pull on the handle below the button simultaneously. The tank should easily swing out.
-
-
-
-
Using the screwdriver, unscrew both of the screws on the backside of the handle.
-
-
-
Pull the handle upwards. It should freely slide away from the base of the machine.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Team
Cal Poly, Team S16-G4, Banghart Winter 2018 Mitglied von Cal Poly, Team S16-G4, Banghart Winter 2018
CPSU-BANGHART-W18S16G4
5 Mitglieder
10 Anleitungen geschrieben
