Zum Hauptinhalt wechseln

Repariere deine Sachen

Recht auf Reparatur

Store

Einleitung

The Hoover Windtunnel 2 Rewind's hose sometimes leaks while the vacuum is working. This means that the device needs a new hose. You can find replacement hoses at your local Hoover retailer.

Werkzeuge

Keine Werkzeuge angegeben.

Ersatzteile

  1. Detach the top of the hose from the device by pressing the release button and pulling up on the hose.
    • Detach the top of the hose from the device by pressing the release button and pulling up on the hose.

  2. Remove the other end of the hose by twisting the hose clockwise and pulling it off.
    • Remove the other end of the hose by twisting the hose clockwise and pulling it off.

  3. Firmly insert the  larger end of the replacement hose into the upward facing hole in the vacuum.
    • Firmly insert the larger end of the replacement hose into the upward facing hole in the vacuum.

  4. Line up the smaller end of the hose and insert it into the downward facing hole.
    • Line up the smaller end of the hose and insert it into the downward facing hole.

    • Twist the hose until it locks.

Abschluss

The Hoover Windtunnel 2 Rewind must have a solid and functional hose to work correctly. With this set of instructions, it is easy to replace a leaky hose.

5 weitere Nutzer haben diese Anleitung absolviert.

Mickey McGuire

Mitglied seit: 22.01.2018

229 Reputation

1 Anleitung geschrieben

Team

Cal Poly, Team S11-G4, Banghart Winter 2018 Mitglied von Cal Poly, Team S11-G4, Banghart Winter 2018

CPSU-BANGHART-W18S11G4

5 Mitglieder

5 Anleitungen geschrieben

Good job, helpful. Thanks!

Celeste Williams-Hughes - Antwort

Thanks, I'm stuck in quarantine and can't go out to get mine fixed, so I'm so glad I found this. Especially since it was just my hose being filled to the brim with dog hair!

Taylore Kirk - Antwort

Kommentar hinzufügen

Statistik anzeigen:

Letzten 24 Stunden: 21

Letzten 7 Tage: 129

Letzten 30 Tage: 587

Insgesamt: 12,754