Einleitung
Follow this guide to replace the camera in the Hott T725-8G.
Was du brauchst
-
-
Carefully remove the black electrical tape connecting the motherboard to the ribbon wire.
-
-
-
Use a pair of Precision Tweezers to squeeze the clip of the ribbon wire to release it.
-
-
-
-
Gently dislodge the camera using the Metal Spudger. The camera is now ready to be replaced.
-
Fast fertig!
To reassemble your device, follow these instructions in reverse order.
Abschluss
To reassemble your device, follow these instructions in reverse order.
Team
UMass Dartmouth, Team 6-2, Martin Fall 2016 Mitglied von UMass Dartmouth, Team 6-2, Martin Fall 2016
UMASSD-MARTIN-F16S6G2
3 Mitglieder
11 Anleitungen geschrieben
