Einleitung

Are you riding with risk because your brake no longer slows down your scooter? Learn how to replace your brake pad to make your scooter safe to ride again.

  1. Remove either of the two 0.2 mm axle screws by using a hex bit 4.0 by turning clockwise.
    • Remove either of the two 0.2 mm axle screws by using a hex bit 4.0 by turning clockwise.

    • The two screws are the same thread so find the screw that has the least torque. Only that screw will be able to removed in this step.

    • Turn the hex bit 4.0 counterclockwise to reassemble the axle screws.

    Kommentar hinzufügen

  2. Slide off the plastic side panel.
    • Slide off the plastic side panel.

    Kommentar hinzufügen

    • Use a hex bit 4.0 to screw back in the 0.2 mm screw as tightly as possible by turning clockwise.

    • You will need to hold the other screw you are not replacing with an additional hex bit 4.0, so that the screws don't spin freely.

    Kommentar hinzufügen

    • Flip over the scooter and use the hex bit 4.0 to remove the other 0.2 mm screw.

    Kommentar hinzufügen

  3. GIVE TOOLS. FIX FOREVER.

    GIVE TOOLS.

    FIX FOREVER.

    Spread the Fixmas cheer.

    GIVE TOOLS. FIX FOREVER.

    Spread the Fixmas cheer.

    • Slide off the other plastic side panel.

    Kommentar hinzufügen

    • On the same side you removed the screw, use the bit extender to push down on the axle inside the wheel.

    • The axle pops out and the wheel easily comes off.

    • Two washers will pop out with the axle.

    Kommentar hinzufügen

    • Remove the two 25mm screws by twisting a Phillips #2 screwdriver counterclockwise.

    • Twist the screwdriver clockwise to reassemble.

    • There are also two nuts that secure the screws.

    Kommentar hinzufügen

    • Wobble to remove the brake step.

    Kommentar hinzufügen

    • Remove the two 8 mm screws by twisting a Phillips #2 screwdriver counterclockwise.

    • Twist the screwdriver clockwise to secure the screws.

    Kommentar hinzufügen

    • Remove the brake pad.

    Kommentar hinzufügen

Abschluss

To reassemble your device, follow these instructions in reverse order.

Meagan Chan

Mitglied seit 08.10.2018

109 Reputation

1 Anleitung geschrieben

Team

Cal Poly, Team S15-G5, White Fall 2018 Mitglied von Cal Poly, Team S15-G5, White Fall 2018

CPSU-WHITE-F18S15G5

4 Mitglieder

5 Anleitungen geschrieben

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 0

Letzte 7 Tage: 12

Letzte 30 Tage: 12

Insgesamt: 41