Repariere deine Sachen Community Store

How to Change Strings on a Ukulele

Was du brauchst

  1. How to Change Strings on a Ukulele, String: Schritt 1, Bild 1 von 1

    • Start by loosening the string you are trying to replace by twisting the pegs.

    • The G and C tuning pegs turn up to tighten and down to loosen while the E and A tuning pegs turn down to tighten and up to loosen.

    Bearbeiten

  2. How to Change Strings on a Ukulele: Schritt 2, Bild 1 von 1

    • Next, grab the new string you are using to replace.

    • The packaging will inform you of which string replaces which note—some are different than others so pay attention!

    Bearbeiten

  3. How to Change Strings on a Ukulele: Schritt 3, Bild 1 von 1

    • Feed the string through the tie block.

    • Remember to leave slack.

    Bearbeiten

  5. How to Change Strings on a Ukulele: Schritt 4, Bild 1 von 1

    • Wrap the string over the tie block and back underneath itself.

    Bearbeiten

  6. How to Change Strings on a Ukulele: Schritt 5, Bild 1 von 2 How to Change Strings on a Ukulele: Schritt 5, Bild 2 von 2

    • Recross the string over itself again, looping it two or three more times.

    Bearbeiten

  7. How to Change Strings on a Ukulele: Schritt 6, Bild 1 von 1

    • Pinch the string and pull tightly.

    Bearbeiten

  8. How to Change Strings on a Ukulele: Schritt 7, Bild 1 von 1

    • Now, fasten the string back to the headstock. To do this, feed the string through the hole in the turning peg.

    Bearbeiten

  9. How to Change Strings on a Ukulele: Schritt 8, Bild 1 von 1

    • Twist again to tighten and cut off extra string once complete.

    Bearbeiten
Ziellinie

2 weitere Nutzer:innen haben diese Anleitung absolviert.

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 1

Letzte 7 Tage: 2

Letzte 30 Tage: 16

Insgesamt: 525