Introduction

Over time debris can build up on the print head nozzle causing irregular flow resulting in poor print quality.

Parts

No parts required.

  1. The printer needs to be on in order to change the ink cartridges.
    • The printer needs to be on in order to change the ink cartridges.

    Add Comment

  2. To locate the ink cartridges the paper output tray must be in the lowered position.
    • To locate the ink cartridges the paper output tray must be in the lowered position.

    • Next lift the scanning unit until the scanning support is vertical.

    • Lower the scanning unit until the scanning unit support seats in the scanning unit support slot.

    Add Comment

  3. Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • Allow the printer to position the ink cartridge carrier into the ink cartridge removal location.

      • Before replacing the ink cartridge ensure the correct ink cartridge is installed.

    • Push down on the front edge of the ink cartridge.

      • Observe the angle at which the ink cartridge is removed.

    • Grasp ink cartridge and pull up and out to remove.

    Add Comment

    • Hold the ink cartridge with the ink nozzle facing up. Using a paper towel firmly wipe the entire ink nozzle.

      • Repeat until the nozzle appears free of any ink and debris.

    Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Garret Wescott

Member since: 10/23/2014

591 Reputation

4 Guides authored

Team

Michigan Tech, Team 1-5, Lauer Fall 2014 Member of Michigan Tech, Team 1-5, Lauer Fall 2014

MTU-LAUER-F14S1G5

3 Members

5 Guides authored

One Comment

is ther an easy way to gain access to the roller at the rear of the machine to clean it

hope342 - Reply

Add Comment

View Statistics:

Past 24 Hours: 2

Past 7 Days: 13

Past 30 Days: 65

All Time: 2,738