Zum Hauptinhalt wechseln

Einleitung

Water leaks for the Keurig B70 Brewing System are sometimes caused by an internal disconnection of the water pump and reservoir. Use this guide to open the Keurig and reseat the water pump.

Ersatzteile

Keine Ersatzteile angegeben.

  1. Before beginning the repair, turn off the brewer and disconnect it from any power source. Move the brewer so that the metal baseplate is easily accessible.
    • Before beginning the repair, turn off the brewer and disconnect it from any power source.

    • Move the brewer so that the metal baseplate is easily accessible.

    • Remove the five silver 4 mm Phillips #2 screws from the baseplate.

  2. Using a spudger, gently pry the metal baseplate from the brewer. Gently set down the baseplate.
    • Using a spudger, gently pry the metal baseplate from the brewer.

    • Gently set down the baseplate.

  3. Android Fix Kits

    A new screen or battery is one kit away.

    Jetzt kaufen

    Android Fix Kits

    A new screen or battery is one kit away.

    Jetzt kaufen
  4. Remove the two silver 4mm Phillips #2 screws that hold the water pump in place. Remove the two silver 4mm Phillips #2 screws that hold the water pump in place.
    • Remove the two silver 4mm Phillips #2 screws that hold the water pump in place.

  5. Realign the rubber gasket of the water pump to create a tight fit.
    • Realign the rubber gasket of the water pump to create a tight fit.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Ein weiterer Nutzer hat diese Anleitung absolviert.

Kristen Temnyk

Mitglied seit: 24.01.2013

500 Reputation

3 Anleitungen geschrieben

Team

Cal Poly, Team 20-2, Maness Winter 2013 Mitglied von Cal Poly, Team 20-2, Maness Winter 2013

CPSU-MANESS-W13S20G2

4 Mitglieder

6 Anleitungen geschrieben

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 1

Letzte 7 Tage: 8

Letzte 30 Tage: 15

Insgesamt: 20,861